Bed raising party......
-
- BSJ 101 Planning Commitee
- Posts: 1346
- Joined: Wed Dec 23, 2009 10:58 pm
- Jeep Year: 1988
- Jeep Model: XJ Cherokee
- Location: West Townsend
Bed raising party......
Anyone local available to give me a hand lifting the bed off my dad's pickup truck some evening this week????
Gotta replace all the brake lines and to do the line for the rear I either have to pull the bed (easier) or remove the gas tank (expensive if a plastic line breaks )
I figure three extra sets of hands will do it
Thanks all!
Gotta replace all the brake lines and to do the line for the rear I either have to pull the bed (easier) or remove the gas tank (expensive if a plastic line breaks )
I figure three extra sets of hands will do it
Thanks all!
You can't bolt on experience!!!!!!
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
-
- BSJ 101 Planning Commitee
- Posts: 371
- Joined: Fri Jan 01, 2010 12:07 pm
- Jeep Model: CJ3B
- Location: STILL DREAMMING OF MOAB!!
Re: Bed raising party......
Thurs or Fri I can
- nhdcoye
- BSJ Member
- Posts: 932
- Joined: Wed Jan 06, 2010 9:04 pm
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
- Real Name: Better known as Dave
Re: Bed raising party......
I'm around on Wed and can bring engine hoist to leave if that helps ?
92 YJ 6Cyl > 3 " lift, ford 8.8 SOA on XJ springs with Aussie out back, D30 with alloy 30's and ARB up front 4:56. 35 MTR's, 10K Winch, SYE ,traction bar, onBd Air and lots of gently used skids
- Kurt
- BSJ Member
- Posts: 4209
- Joined: Wed Dec 23, 2009 11:53 am
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
- Real Name: Kurt K.
- Location: Pepperell, MA
Re: Bed raising party......
John,
I can help you any evening you want
Can bring an engine hoist too.
I can help you any evening you want
Can bring an engine hoist too.
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
-
- BSJ 101 Planning Commitee
- Posts: 1346
- Joined: Wed Dec 23, 2009 10:58 pm
- Jeep Year: 1988
- Jeep Model: XJ Cherokee
- Location: West Townsend
Re: Bed raising party......
Bolts are all removed from the bed.
Kurt, how long is the boom on your hoist?
I've got one here, but the arm is a little short.
Would like to get the bed off tomorrow sometime so I can get to work on the lines (need the truck ready by Sept 7th)
Kurt, how long is the boom on your hoist?
I've got one here, but the arm is a little short.
Would like to get the bed off tomorrow sometime so I can get to work on the lines (need the truck ready by Sept 7th)
You can't bolt on experience!!!!!!
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
- Carl McFly
- BSJ Member
- Posts: 2466
- Joined: Wed Dec 23, 2009 11:14 pm
- Jeep Year: 2000
- Jeep Model: TJ Wrangler
- Real Name: Carl
- Location: Medford MA
Re: Bed raising party......
if you need a third set of hands..... just lemme know when and where. Have a new appliance being delivered Wednesday but *supposedly* by 1 PM
"Roads? Where we're going, we don't need roads"
- Kurt
- BSJ Member
- Posts: 4209
- Joined: Wed Dec 23, 2009 11:53 am
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
- Real Name: Kurt K.
- Location: Pepperell, MA
Re: Bed raising party......
Not sure on the boom length. It does telescope out to a few lengths.johnsxj wrote:Bolts are all removed from the bed.
Kurt, how long is the boom on your hoist?
I've got one here, but the arm is a little short.
Would like to get the bed off tomorrow sometime so I can get to work on the lines (need the truck ready by Sept 7th)
Would have to measure when I get home today.
I can certainly bring it tonight regardless just in case we need it.
Just gotta toss it in the truck when I get home.
Let us know when you want us there
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
- nhdcoye
- BSJ Member
- Posts: 932
- Joined: Wed Jan 06, 2010 9:04 pm
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
- Real Name: Better known as Dave
Re: Bed raising party......
Can be there after work..... just say when
92 YJ 6Cyl > 3 " lift, ford 8.8 SOA on XJ springs with Aussie out back, D30 with alloy 30's and ARB up front 4:56. 35 MTR's, 10K Winch, SYE ,traction bar, onBd Air and lots of gently used skids
- Kurt
- BSJ Member
- Posts: 4209
- Joined: Wed Dec 23, 2009 11:53 am
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
- Real Name: Kurt K.
- Location: Pepperell, MA
Re: Bed raising party......
The boom length (reach) on my hoist is 47" as measured from the lift piston to the hook.
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
-
- BSJ 101 Planning Commitee
- Posts: 1346
- Joined: Wed Dec 23, 2009 10:58 pm
- Jeep Year: 1988
- Jeep Model: XJ Cherokee
- Location: West Townsend
Re: Bed raising party......
O.K. How does this evening sound for people?
Kurt, please bring your hoist!!! Mine hoist's reach is only 31"
Kurt, please bring your hoist!!! Mine hoist's reach is only 31"
You can't bolt on experience!!!!!!
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
- Kurt
- BSJ Member
- Posts: 4209
- Joined: Wed Dec 23, 2009 11:53 am
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
- Real Name: Kurt K.
- Location: Pepperell, MA
Re: Bed raising party......
What Time?
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
-
- BSJ 101 Planning Commitee
- Posts: 1346
- Joined: Wed Dec 23, 2009 10:58 pm
- Jeep Year: 1988
- Jeep Model: XJ Cherokee
- Location: West Townsend
Re: Bed raising party......
Dang! Thought I posted that! I'm at the shop 'till 6 so anytime after that.
You can't bolt on experience!!!!!!
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
- Kurt
- BSJ Member
- Posts: 4209
- Joined: Wed Dec 23, 2009 11:53 am
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
- Real Name: Kurt K.
- Location: Pepperell, MA
Re: Bed raising party......
O-tay, I'll shoot for 6 with the hoist.
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
-
- BSJ 101 Planning Commitee
- Posts: 1346
- Joined: Wed Dec 23, 2009 10:58 pm
- Jeep Year: 1988
- Jeep Model: XJ Cherokee
- Location: West Townsend
Re: Bed raising party......
Thanks again Kurt and Carl for swinging by and giving me a hand to get the bed off!!!!!!!!!!!!!!!!!
You can't bolt on experience!!!!!!
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
- Carl McFly
- BSJ Member
- Posts: 2466
- Joined: Wed Dec 23, 2009 11:14 pm
- Jeep Year: 2000
- Jeep Model: TJ Wrangler
- Real Name: Carl
- Location: Medford MA
Re: Bed raising party......
pffttttt..... piece of cake! You did all the hard work before we got there
"Roads? Where we're going, we don't need roads"