Bed raising party......

johnsxj
BSJ 101 Planning Commitee
Posts: 1346
Joined: Wed Dec 23, 2009 10:58 pm
Jeep Year: 1988
Jeep Model: XJ Cherokee
Location: West Townsend

Bed raising party......

Unread post by johnsxj »

Anyone local available to give me a hand lifting the bed off my dad's pickup truck some evening this week????
Gotta replace all the brake lines and to do the line for the rear I either have to pull the bed (easier) or remove the gas tank (expensive if a plastic line breaks :angry-cussingblack: )

I figure three extra sets of hands will do it :lol:

Thanks all!
You can't bolt on experience!!!!!!
Function over form=4x4

"The opinions expressed in this program do not reflect the views of this network."
smileyfish
BSJ 101 Planning Commitee
Posts: 371
Joined: Fri Jan 01, 2010 12:07 pm
Jeep Model: CJ3B
Location: STILL DREAMMING OF MOAB!!

Re: Bed raising party......

Unread post by smileyfish »

Thurs or Fri I can
User avatar
nhdcoye
BSJ Member
Posts: 932
Joined: Wed Jan 06, 2010 9:04 pm
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Better known as Dave

Re: Bed raising party......

Unread post by nhdcoye »

I'm around on Wed and can bring engine hoist to leave if that helps ?
92 YJ 6Cyl > 3 " lift, ford 8.8 SOA on XJ springs with Aussie out back, D30 with alloy 30's and ARB up front 4:56. 35 MTR's, 10K Winch, SYE ,traction bar, onBd Air and lots of gently used skids
User avatar
Kurt
BSJ Member
Posts: 4207
Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA

Re: Bed raising party......

Unread post by Kurt »

John,

I can help you any evening you want ;)

Can bring an engine hoist too.
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
johnsxj
BSJ 101 Planning Commitee
Posts: 1346
Joined: Wed Dec 23, 2009 10:58 pm
Jeep Year: 1988
Jeep Model: XJ Cherokee
Location: West Townsend

Re: Bed raising party......

Unread post by johnsxj »

Bolts are all removed from the bed.
Kurt, how long is the boom on your hoist?
I've got one here, but the arm is a little short.
Would like to get the bed off tomorrow sometime so I can get to work on the lines (need the truck ready by Sept 7th)
You can't bolt on experience!!!!!!
Function over form=4x4

"The opinions expressed in this program do not reflect the views of this network."
User avatar
Carl McFly
BSJ Member
Posts: 2466
Joined: Wed Dec 23, 2009 11:14 pm
Jeep Year: 2000
Jeep Model: TJ Wrangler
Real Name: Carl
Location: Medford MA

Re: Bed raising party......

Unread post by Carl McFly »

if you need a third set of hands..... just lemme know when and where. Have a new appliance being delivered Wednesday but *supposedly* by 1 PM
"Roads? Where we're going, we don't need roads"
User avatar
Kurt
BSJ Member
Posts: 4207
Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA

Re: Bed raising party......

Unread post by Kurt »

johnsxj wrote:Bolts are all removed from the bed.
Kurt, how long is the boom on your hoist?
I've got one here, but the arm is a little short.
Would like to get the bed off tomorrow sometime so I can get to work on the lines (need the truck ready by Sept 7th)
Not sure on the boom length. It does telescope out to a few lengths.
Would have to measure when I get home today.
I can certainly bring it tonight regardless just in case we need it.
Just gotta toss it in the truck when I get home.

Let us know when you want us there ;)
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
User avatar
nhdcoye
BSJ Member
Posts: 932
Joined: Wed Jan 06, 2010 9:04 pm
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Better known as Dave

Re: Bed raising party......

Unread post by nhdcoye »

Can be there after work..... just say when
92 YJ 6Cyl > 3 " lift, ford 8.8 SOA on XJ springs with Aussie out back, D30 with alloy 30's and ARB up front 4:56. 35 MTR's, 10K Winch, SYE ,traction bar, onBd Air and lots of gently used skids
User avatar
Kurt
BSJ Member
Posts: 4207
Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA

Re: Bed raising party......

Unread post by Kurt »

The boom length (reach) on my hoist is 47" as measured from the lift piston to the hook.
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
johnsxj
BSJ 101 Planning Commitee
Posts: 1346
Joined: Wed Dec 23, 2009 10:58 pm
Jeep Year: 1988
Jeep Model: XJ Cherokee
Location: West Townsend

Re: Bed raising party......

Unread post by johnsxj »

O.K. How does this evening sound for people?
Kurt, please bring your hoist!!! Mine hoist's reach is only 31"
You can't bolt on experience!!!!!!
Function over form=4x4

"The opinions expressed in this program do not reflect the views of this network."
User avatar
Kurt
BSJ Member
Posts: 4207
Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA

Re: Bed raising party......

Unread post by Kurt »

What Time? :whistle:
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
johnsxj
BSJ 101 Planning Commitee
Posts: 1346
Joined: Wed Dec 23, 2009 10:58 pm
Jeep Year: 1988
Jeep Model: XJ Cherokee
Location: West Townsend

Re: Bed raising party......

Unread post by johnsxj »

Dang! Thought I posted that! I'm at the shop 'till 6 so anytime after that.
You can't bolt on experience!!!!!!
Function over form=4x4

"The opinions expressed in this program do not reflect the views of this network."
User avatar
Kurt
BSJ Member
Posts: 4207
Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA

Re: Bed raising party......

Unread post by Kurt »

O-tay, I'll shoot for 6 with the hoist.
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
johnsxj
BSJ 101 Planning Commitee
Posts: 1346
Joined: Wed Dec 23, 2009 10:58 pm
Jeep Year: 1988
Jeep Model: XJ Cherokee
Location: West Townsend

Re: Bed raising party......

Unread post by johnsxj »

Thanks again Kurt and Carl for swinging by and giving me a hand to get the bed off!!!!!!!!!!!!!!!!!
You can't bolt on experience!!!!!!
Function over form=4x4

"The opinions expressed in this program do not reflect the views of this network."
User avatar
Carl McFly
BSJ Member
Posts: 2466
Joined: Wed Dec 23, 2009 11:14 pm
Jeep Year: 2000
Jeep Model: TJ Wrangler
Real Name: Carl
Location: Medford MA

Re: Bed raising party......

Unread post by Carl McFly »

pffttttt..... piece of cake! You did all the hard work before we got there :handgestures-thumbup:
"Roads? Where we're going, we don't need roads"
Post Reply