New Wait lister from Princeton MA
Moderator: Kurt
Forum rules
Please post a pic of your jeep.
Tell us about the mods you have made.
Tell us about the mods you hope to make in the future.
How long have you been a member of Baystate?
How long have you been offroading?
Is this your first jeep?
AND REMEMBER ** NO TRAIL NAMES **
Please post a pic of your jeep.
Tell us about the mods you have made.
Tell us about the mods you hope to make in the future.
How long have you been a member of Baystate?
How long have you been offroading?
Is this your first jeep?
AND REMEMBER ** NO TRAIL NAMES **
-
- BSJ 101 Planning Commitee
- Posts: 25
- Joined: Wed Mar 03, 2021 10:01 pm
- Jeep Year: 2021
- Jeep Model: JL Wrangler
- Real Name: Gerry
New Wait lister from Princeton MA
Thanks for adding me as a member on the Forum and the wait list. I live in Princeton but I’m from and work in Worcester. New to the Jeep thing first time owner of a 2021 Rubicon. Had many 4x4’s mainly for snow plowing but my first was a 86 f150 short bed 33in tires with a warn winch back in 80’s and 90’s had a lot of fun with it. Bought the the truck when I was stationed at NAS Meridian Mississippi and needed a winch on the clay back roads. I Would take it off road up here, Maine and Vermont but no real rock crawling lol. Looking forward to learning what the jeep can do. I plan on adding a winch in the future and more as I go along. I have no mods yet. Thanks again Gerry
Last edited by Gso125 on Thu Mar 04, 2021 10:39 am, edited 1 time in total.
- MDSRACING398
- BSJ 101 Planning Commitee
- Posts: 3294
- Joined: Fri Feb 12, 2016 10:24 pm
- Jeep Year: 1985
- Jeep Model: CJ7
- Real Name: Mark
Re: New Wait lister from Princeton MA
Welcome Gerry
Do it right the first time!
Second place is First Loser! Work Harder
Semper Fi
Second place is First Loser! Work Harder
Semper Fi
- RandyCarol
- BSJ Member
- Posts: 1134
- Joined: Sun Jan 31, 2016 10:58 am
- Jeep Year: 2013
- Jeep Model: JK Wrangler
- Real Name: Randy
- Location: Dracut, Ma
Re: New Wait lister from Princeton MA
Welcome Gerry. Nice Rubicon, you’ll have fun with it even before you start moding
Stubby antenna & Prorock 60’s
- TheDirector
- BSJ BOD Secretary
- Posts: 276
- Joined: Thu Nov 12, 2020 11:06 pm
- Jeep Year: 2021
- Jeep Model: JL Wrangler
- Real Name: Jeff
Re: New Wait lister from Princeton MA
Hi Gerry, that looks familiar
Turn up the radio and Bump it! that will buff right out.
-
- BSJ 101 Planning Commitee
- Posts: 25
- Joined: Wed Mar 03, 2021 10:01 pm
- Jeep Year: 2021
- Jeep Model: JL Wrangler
- Real Name: Gerry
Re: New Wait lister from Princeton MA
Haha I just copied your picture lol. I added some cool stickers to stand out
- TheDirector
- BSJ BOD Secretary
- Posts: 276
- Joined: Thu Nov 12, 2020 11:06 pm
- Jeep Year: 2021
- Jeep Model: JL Wrangler
- Real Name: Jeff
Re: New Wait lister from Princeton MA
I marked mine last night
Turn up the radio and Bump it! that will buff right out.
-
- BSJ 101 Planning Commitee
- Posts: 25
- Joined: Wed Mar 03, 2021 10:01 pm
- Jeep Year: 2021
- Jeep Model: JL Wrangler
- Real Name: Gerry
Re: New Wait lister from Princeton MA
Nicely done Sir
- ImNotCassie
- BSJ Member
- Posts: 2130
- Joined: Thu Mar 31, 2016 2:44 pm
- Jeep Year: 2011
- Jeep Model: JK Wrangler
- Real Name: Cassandra-NOT CASSIE
- Contact:
Re: New Wait lister from Princeton MA
Where did you get the letters
- TheDirector
- BSJ BOD Secretary
- Posts: 276
- Joined: Thu Nov 12, 2020 11:06 pm
- Jeep Year: 2021
- Jeep Model: JL Wrangler
- Real Name: Jeff
Re: New Wait lister from Princeton MA
I think there were other lettering styles too for JK etc, I went with this one cause they had the matching font for the JL.
Turn up the radio and Bump it! that will buff right out.
- mikepa
- BSJ Member
- Posts: 96
- Joined: Mon Feb 17, 2020 9:57 am
- Jeep Year: 2018
- Jeep Model: JL Wrangler
- Real Name: Mike
- Location: Concord MA
Re: New Wait lister from Princeton MA
Welcome Gerry. Nice to see another JLUR, especially granite crystal. I think that makes four, possibly five.
2018 JL Unlimited Rubicon, 2.5" MC GameChanger, 37" Toyo MTs,
MC skids/rock rails, PowerTank CO2 air, front trail camera
and one wicked cool, push button retractable soft top
MC skids/rock rails, PowerTank CO2 air, front trail camera
and one wicked cool, push button retractable soft top
- TheDirector
- BSJ BOD Secretary
- Posts: 276
- Joined: Thu Nov 12, 2020 11:06 pm
- Jeep Year: 2021
- Jeep Model: JL Wrangler
- Real Name: Jeff
Re: New Wait lister from Princeton MA
Twinsies...we will need a picture, granite crystal line up!
Turn up the radio and Bump it! that will buff right out.
-
- BSJ 101 Planning Commitee
- Posts: 25
- Joined: Wed Mar 03, 2021 10:01 pm
- Jeep Year: 2021
- Jeep Model: JL Wrangler
- Real Name: Gerry
Re: New Wait lister from Princeton MA
Nice looking Jeep LOL love the color. I have a question for you I have the same bumper setup waiting on my new winch and warn winch plate to arrive and have been debating on the front bar to get a stock one or a warn one. Can’t tell from the picture what one you have and if you like it. I was leaning towards the stock one so I can use a strap on the tow hooks.
- mikepa
- BSJ Member
- Posts: 96
- Joined: Mon Feb 17, 2020 9:57 am
- Jeep Year: 2018
- Jeep Model: JL Wrangler
- Real Name: Mike
- Location: Concord MA
Re: New Wait lister from Princeton MA
Yes. I am doing my best to stick with both front and rear stock steel bumpers. I do not see the need to replace, especially the front as they function and look pretty good to me. And while I'm not a big fan of the open front hooks for recover, the winch solves that concern. I did remove the front bumper caps to maximize room on those really tight turns that the four door sometimes needs on trail, getting trees right up to the tires.
The hoop is just cosmetic from Maximus 3. It can be bolted to stock bumper tilted backwardor forward like stinger. I have mine back to allow more view for front facing trail camera.
The hoop is just cosmetic from Maximus 3. It can be bolted to stock bumper tilted backwardor forward like stinger. I have mine back to allow more view for front facing trail camera.
2018 JL Unlimited Rubicon, 2.5" MC GameChanger, 37" Toyo MTs,
MC skids/rock rails, PowerTank CO2 air, front trail camera
and one wicked cool, push button retractable soft top
MC skids/rock rails, PowerTank CO2 air, front trail camera
and one wicked cool, push button retractable soft top
- mikepa
- BSJ Member
- Posts: 96
- Joined: Mon Feb 17, 2020 9:57 am
- Jeep Year: 2018
- Jeep Model: JL Wrangler
- Real Name: Mike
- Location: Concord MA
Re: New Wait lister from Princeton MA
Gerry, Just to be clear, my setup is a little different than yours as I purchased the factory-installed steel bumpers which allow for the end cap removal, hoop install and warn winch plate/winch. I am not familiar with your front bumper. Sorry.Gso125 wrote: ↑Mon Mar 15, 2021 7:32 pm
Nice looking Jeep LOL love the color. I have a question for you I have the same bumper setup waiting on my new winch and warn winch plate to arrive and have been debating on the front bar to get a stock one or a warn one. Can’t tell from the picture what one you have and if you like it. I was leaning towards the stock one so I can use a strap on the tow hooks.
2018 JL Unlimited Rubicon, 2.5" MC GameChanger, 37" Toyo MTs,
MC skids/rock rails, PowerTank CO2 air, front trail camera
and one wicked cool, push button retractable soft top
MC skids/rock rails, PowerTank CO2 air, front trail camera
and one wicked cool, push button retractable soft top
-
- BSJ 101 Planning Commitee
- Posts: 25
- Joined: Wed Mar 03, 2021 10:01 pm
- Jeep Year: 2021
- Jeep Model: JL Wrangler
- Real Name: Gerry
Re: New Wait lister from Princeton MA
mikepa wrote: ↑Tue Mar 16, 2021 12:30 pmGerry, Just to be clear, my setup is a little different than yours as I purchased the factory-installed steel bumpers which allow for the end cap removal, hoop install and warn winch plate/winch. I am not familiar with your front bumper. Sorry.Gso125 wrote: ↑Mon Mar 15, 2021 7:32 pm
Nice looking Jeep LOL love the color. I have a question for you I have the same bumper setup waiting on my new winch and warn winch plate to arrive and have been debating on the front bar to get a stock one or a warn one. Can’t tell from the picture what one you have and if you like it. I was leaning towards the stock one so I can use a strap on the tow hooks.
Hi Mike sorry it’s the same as your bumper I just haven’t posted updated pictures. I was waiting on the winch and warn winch plate. (Just got an email the plate went on back order with no projected date from warn hopefully I can find one)
Does your hoop bar mount close to the tow hooks or can you still use a tow strap with them. The warn hoop mounts close to the hooks making it so you can’t use a strap over the hook. Thank you Gerry
Last edited by Gso125 on Tue Mar 16, 2021 2:05 pm, edited 1 time in total.