Suggestion....
When you install your assist I'd suggest you leave the draglink disconnected the first time you run the system.
Be sure the hydraulic cylinder in working in the right direction before connecting the draglink.
I found today that somehow the cylinder hoses were reversed eventhough I was sure they were correct.
PS box was trying to steer right and the ram wanted to go left! DOH
Also watch the fluid level and keep topping it off.
Thanks Kurt! I was planning on not tightening the draglink mount yet, so hopefully it will "self-center" to some extent. We'll see! I'm also going to not tighten the belt yet, so I can spin the pump by hand to help prime/bleed the whole system.
"god had his sh!t together when he made boobies" -franky