Page 1 of 1
All metal radiator
Posted: Mon Aug 16, 2010 12:42 pm
by Baseshakers
so i've been doing so research and I like the idea of this one:
http://cgi.ebay.com/ebaymotors/1999-200 ... ccessories
there's no way i'm going with a plastic/metal one again, but i don't feel the need to spend $300+ on a three row radiator. anyone you guys can recommend?
Re: All metal radiator
Posted: Mon Aug 16, 2010 1:53 pm
by DDewar53
The one you showed looks pretty good, depending on the quality. Unfortunately, that's something you'll never know until you try it. Let us know how it works out, though, it'll be good to have a source for something like that.
Re: All metal radiator
Posted: Mon Aug 16, 2010 11:57 pm
by johnsxj
That seller has all pos. feedback. Should be a safe bet.
Re: All metal radiator
Posted: Tue Aug 17, 2010 6:01 am
by Frank
I have a radiator shop in town and I could price out a new one if you would like. I cant see you having a problem with a all metal rad , unless you hit it. FjR68
Re: All metal radiator
Posted: Tue Aug 17, 2010 6:54 am
by ZAEDOCK
Radiator Barn is awesome. An all metal three row for my '92 is under $200.00
http://www.radiatorbarn.com/
Re: All metal radiator
Posted: Tue Aug 17, 2010 7:24 am
by ZAEDOCK
Your Vehicle
2005 JEEP WRANGLER
Submodel: ALL MODELS
Engine Size: ALL ENGINE SIZES
A/C: FOR BOTH A/C AND NON A/C VEHICLES
The following radiator(s) were found for your vehicle:
(scroll down for additional options)
OPTION 1:
3 ROW ALL METAL RAD
Specifications
Core Size: 18-1/8 X 20 X 1-13/16
Inlet Header: 20 X 2-3/4
Outlet Header: 20 X 2-3/4
Inlet Connection: TOP 1-1/4 PASSENGERS SIDE
Outlet Connection: BOTTOM 1-1/2 DRIVERS SIDE
Transmission Oil Cooler: YES
Engine Oil Cooler: NONE
Mounting:
Notes: THREE ROW, ALL METAL
$198.73 2005 JEEP WRANGLER radiator
$0.00 FREE Shipping in the Continental United States
$0.00 FREE Lifetime Warranty
-$5.00 Online Discount
$193.73 IS YOUR FINAL COST
Re: All metal radiator
Posted: Tue Aug 17, 2010 9:03 am
by Kurt
I've gottern 3 or 4 over the years from Radiator Barn.
Good prices, fast shipping.
Only downside is their packaging is sometimes a bit sparse.
Had a couple of rads get delivered and the filler necks were tweeked.
Just had to tweek them back a bit before installing them.
All have work flawlessly.
Re: All metal radiator
Posted: Tue Aug 17, 2010 11:18 am
by Baseshakers
good to hear you guys have had good results from radiator barn. one question; i've heard that 3 row is actually worse in a TJ since the radiator is the same depth, therefore i'd be better off with a two row. (though radiator barn states that their 3 row is deeper) opinions?