warning to JL owners, more welding issues under investigatio

You can talk about anything here
User avatar
Hoodoo Man
BSJ 101 Planning Commitee
Posts: 3799
Joined: Fri Jan 01, 2010 11:29 am
Jeep Year: 1970
Jeep Model: C101
Real Name: Jeff Cambray
Location: Westford MA

warning to JL owners, more welding issues under investigatio

Unread post by Hoodoo Man »

I saw this posted on another forum. Its from an odd source but seems fact based. Looks like the JL has more welding issues on the frame than with the track bar. May want to inspect the welds if you are able to... seems like a recall may be coming but as people here actually wheel I thought it would be worth sharing as this seems like a potentially dangerous situation off road.

https://www.wcpo.com/money/consumer/don ... ler-frames
Government investigating welds on Jeep Wrangler frames
Owners complain of poor-quality welding, holes and rust
Posted: 10:54 AM, Jan 09, 2020 Updated: 11:01 AM, Jan 09, 2020
By: John Matarese


2018-19 Jeep Wranglers to be recalled for problem with frame, reports say
The Jeep Wrangler is one of the most popular SUVs in the country, and the world.

But lately a growing number of owners have been raising questions about the frames under those vehicles. And they don't know if a recent recall of some models is enough to fix the issues.

Benjamin Rutter's 2019 Jeep Wrangler is spotless. But when this Jeep enthusiast was recently cleaning the underside after a drive, he was puzzled.

"These welds are nowhere near what I expected," he said.

Rutter knows a bit about welding,and saw what looked to him like breaks in what should have been a solid weld.

"You've got an inch or so of completely missed bead on this part of the rear frame," he said.

He is concerned about what could happen down the road.

"My biggest fear is if I went off-roading," he said, "and did a full flex on the wheels, that frame rail could completely pop."

Roy Carl is a Jeep customizer and restorer, and owner of Performance Off Road . He has been working on Wrangler frames for 20 years, often replacing the entire frame in a complete restoration.

He claims he has been seeing questionable welding on several newer-model Wranglers that came into his shop.

"They didn't penetrate the metal good enough with the weld," he said. "I think it's a huge safety concern."

Government launches investigation

The National Highway Traffic Safety Administration (NHTSA) has now launched an investigation into frame welding on a quarter-million 2018 and 2019 Wranglers, following complaints about questionable welds.

Jeep forums have hundreds of posts about this topic.

This follows a recall of 18,000 2018 and 2019 9models for possible steering failure due to bad welds on the front track bar, a condition that enthusiasts say can lead to what they call a "death wobble" while driving at highway speeds..

We contacted Jeep parent Fiat-Chrysler, where a spokesman could only tell us "Jeep is cooperating with the investigation," but reminded us the Wrangler "is the most awarded new vehicle of 2019," attesting to its build quality.

But restorer Roy Carl says it's worth having someone inspect your 2018-19 Wrangler if you have have noticed any particularly questionable welds.

"We saw some welds we didn't like and advised our clients to send them back to the dealership," he said, where some were able to get repairs done under warranty.

Do you have questions? Check with your dealer or an independent repair shop, and hopefully they can provide you some answers, so you don't waste your money.



Copyright 2020 Scripps Media, Inc. All rights reserved. This material may not be published, broadcast, rewritten, or
Send me an email, at jmatarese@wcpo.com or message me on Facebook .
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: warning to JL owners, more welding issues under investig

Unread post by Frank »

I think world wide EVERY tj owner should start to speak up also. The government made Toyota replace all the bad frames . How did Chrysler get by on not doing the same thing . Who did they pay off ? Lets go TJ , TJ lets go ! FjR68
User avatar
obedb
BSJ 101 Planning Commitee
Posts: 2
Joined: Thu Jan 16, 2020 3:57 pm
Jeep Year: 2011
Jeep Model: DJ
Real Name: Richard Hull
Contact:

Re: warning to JL owners, more welding issues under investig

Unread post by obedb »

The action involves approximately 270,000 JL Wranglers from the 2018 and 2019 model years and comes after 3,566 complaints and a petition filed by an owner last year.
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: warning to JL owners, more welding issues under investig

Unread post by Frank »

Just crazy it took over a year to shut down production to figure out theres a problem . FjR68
Post Reply