How wide is a JK

User avatar
schwalby
BSJ 101 Planning Commitee
Posts: 1677
Joined: Fri Jan 01, 2010 1:38 pm
Jeep Year: 2003
Jeep Model: TJ Wrangler
Real Name: Josh (Wife is Jen)
Location: Northwood NH

How wide is a JK

Unread post by schwalby »

I've looked online all over and all I can find is the body width. Need to know total width from outside of wheel to outside of wheel.
Josh Schwalb
ArticRubi wrote:Remember: poor planning on my part constitutes an emergency on yours.
User avatar
Modeler
BSJ Member
Posts: 977
Joined: Sat Oct 16, 2010 5:37 pm
Jeep Year: 2005
Jeep Model: LJ Wrangler

Re: How wide is a JK

Unread post by Modeler »

It is going to vary a little bit, the track width is 61.9", track is the center of the tire to center of the other one. Add in the width of the tire (only one since half is sticking beyond the center on each side) and you'll be around 72" for a stock Rubicon (255/75/17). That jives with the max body width of 73.7".

Obviously, that goes out the window with aftermarket wheels and tires.
Speed costs money, how slow do you want to go?
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: How wide is a JK

Unread post by Frank »

Why you fatty ! FjR68
User avatar
schwalby
BSJ 101 Planning Commitee
Posts: 1677
Joined: Fri Jan 01, 2010 1:38 pm
Jeep Year: 2003
Jeep Model: TJ Wrangler
Real Name: Josh (Wife is Jen)
Location: Northwood NH

Re: How wide is a JK

Unread post by schwalby »

Looking at some trailers and want to make sure there is enough room between wheel wells or if they will have to be reinforced. I doubt I would ever have a Jeep that would need to drive over the wheel wells of a trailer but want to make sure.
Josh Schwalb
ArticRubi wrote:Remember: poor planning on my part constitutes an emergency on yours.
User avatar
Modeler
BSJ Member
Posts: 977
Joined: Sat Oct 16, 2010 5:37 pm
Jeep Year: 2005
Jeep Model: LJ Wrangler

Re: How wide is a JK

Unread post by Modeler »

That is what I figured, knowing that you were looking at trailers and all that.
Speed costs money, how slow do you want to go?
User avatar
ArticRubi
BSJ 101 Planning Commitee
Posts: 690
Joined: Wed Sep 21, 2011 5:02 pm
Jeep Year: 2008
Jeep Model: JK Wrangler

Re: How wide is a JK

Unread post by ArticRubi »

Axles are 65" WMS -> WMS. Total width will depend on tire width and wheel backspacing. My JK on stock axles, with 4.5" backspacing and 35x12.50's ended up at just a bit less than 80" IIRC. Most standard flat bed trailers have 82" between the fenders.
User avatar
schwalby
BSJ 101 Planning Commitee
Posts: 1677
Joined: Fri Jan 01, 2010 1:38 pm
Jeep Year: 2003
Jeep Model: TJ Wrangler
Real Name: Josh (Wife is Jen)
Location: Northwood NH

Re: How wide is a JK

Unread post by schwalby »

The two trailers I am looking at are 83" and 78" between wheel wells. Not sure why one is smaller. They are both enclosed trailers first one being a 7K trailer and second being a 10K. Guessing the heavier weight axles are just smaller.

I think what I will just end up doing is having them reinforce the fenders and then I can make up some movable ramps so the Jeep will get up and over easier. Don't want to fight with doing that if I have to winch it in. Or someone else's Jeep.
Josh Schwalb
ArticRubi wrote:Remember: poor planning on my part constitutes an emergency on yours.
Post Reply