Baystate Jeepers

Anyone help me out ? Cant find a listing by year or model the wms/wms width of the front Dana 44 used in the Jeeps. I know it has to be 79 or older. My 86 axles are supposed to be at or near 59.9" I think. They are the wide track. I need to find some thing that isnt going to be waaaaay to much wider . Thanks FjR68

Thank you Jeff . I mean if I were keeping her Id be looking for something like this ! FjR68

That list has a lot of wrong info and I would trust it. Cherokee / XJ is 60" WMS for all years. So are all TJ/YJ factory axles.

Wide track CJ was 58", narrow track CJ something like 54" or 56" (I don't recall which).

JW

nostaw wrote:That list has a lot of wrong info and I would not trust it.

Do you mean that you would Not trust it?

nostaw wrote:That list has a lot of wrong info and I would trust it. Cherokee / XJ is 60" WMS for all years. So are all TJ/YJ factory axles.

Wide track CJ was 58", narrow track CJ something like 54" or 56" (I don't recall which).

JW

Bummer, I pulled my post down with that listing in it to avoid spreading the word incorrectly.

RalphTomaccio wrote:

nostaw wrote:That list has a lot of wrong info and I would trust it.

Do you mean that you would Not trust it?

Oops.... Yah, I wouldn't trust it.

I should also add the Ford Exploder 8.8 axles... ~58" .... they are really slightly more than 58", but less than 58.5".

JW