Carl Be quiet LOL
![Image](http://i154.photobucket.com/albums/s265/flyinbrian_photos/rearbumper-1.jpg)
This is how it looked before
![Image](http://i154.photobucket.com/albums/s265/flyinbrian_photos/Genrightfenders004.jpg)
LOLCarl McFly wrote::-X
LOL A slightly modified stock spare tire carrier Where it bolts on to the tail gate had a 2 in puck in it to move the tire out the bottom has a 3 in puck in it It worked all summerChris wrote:Hey brian.... do you have the large tire mounted to the stock spare tire mount??
The angles are 45 degrees I checked after they were cut its not centered yet Its over to the passenger side 1 1/4 inches its not Primer that was the 1st coat ITS FLAT BLACK Need 1more bracket welded on the passenger side that will be done Sunday morningFrank wrote:Brian : My guess is Home Made Co. The angles arent even and it6s primer black ! FjR68
If I dont like it Plasma cutter LOL it go past the body a little a straight on pic would be betterScott wrote:I don't know Brian, IMHO it looks a little long but it could just be the picture.
Its a little more than 3 inchs past the body this pic is better It will cost me $30 to shorten it ( Cut of the Tips )Scott wrote:I don't know Brian, IMHO it looks a little long but it could just be the picture.
Oh yea I know what your saying that will be even with the body it will make a 2-3in straight line going down to the angle it will cost me about $30 to do I been thinking about it since I saw the bumper cut +welded up It might even look better that way I will make up my mind this weekScott wrote:Yeah, I don't know. I think if it were me I would take off about 2" off the points and have a small flat edge and some bevel. know what I'm talking about? the points look like they'll hurt.
just my $.02
BSJ President 2003 - 2005Carl McFly wrote:X2, I agree with Joe. And not just because he's man candy
lolZAEDOCK wrote:Looks like a sissy bumper.