Baystate Jeepers

I wanted to give a quick shout out to Raptor Liner as I just wrapped up installation of front tube fenders, sliders, and rear corners. I decided to bed line everything for durability reasons, plus it looks pretty awesome. Their "DIY" kit comes with 4 quart bottles of liner, a bottle of hardening agent to be added at the time of application, and a spray gun that the quart bottles thread into directly; it ships for about $125. Application was extremely easy and worked best at about 55 psi (they recommend between 30 - 60.) U-Pol claims a gallon of the stuff is plenty to do a full size truck bed, or the tub of a 2 door Jeep...as soon as I get my roll cage in and new bumpers fabricated I'll definitely bed going back to this stuff for coverage.

Pics....

No, really, got any pics? I'm looking into doing some sort of liner in my 8. Would like to see what it looks like.

Sorry, I'll post some up this evening when I get home

Hey, sorry it took a little while to get these pictures up.
Here's a close up of the front fender:


And a bit further back. I did my fenders, sliders, and rear corners with it:


This is the spray gun. You get 4 of these quart bottles plus the gun when you order the kit, just add the hardening agent and its ready to spray:


And a link to the place I got it from:
http://www.tptools.com/p/2600,233_U-Pol ... r-Kit.html

Sorry for the delay! I did all the armor and the grille with a bit less than 3 quarts. 4 is supposed to be plenty to do the tub of a 2 door JK, I heard you'll need a bit more for a 4 door or cherokee, ect...