Page 1 of 1
YJ flair kits
Posted: Fri Jan 13, 2012 2:17 pm
by KevinP
Can I use Bushwacker Flat Style Flares For 97-06 JeepĀ® Wrangler TJ & Unlimited on my yj if i dont mind trimming and moving mounting holes? Any input would be helpful. Thank you...
Re: YJ flair kits
Posted: Fri Jan 13, 2012 2:24 pm
by ZAEDOCK
Sure , but why not just buy the YJ flares?
You looking to open the fender to fit a larger tire?
Re: YJ flair kits
Posted: Fri Jan 13, 2012 2:39 pm
by KevinP
Yeah, if i can fit 35's ill use them and go with 4.56 gears but dont know if they will fit with the RE 4.5 lift and 1" body lift.
Re: YJ flair kits
Posted: Fri Jan 13, 2012 3:21 pm
by KevinP
I guess what I really need to know is if I can fit 35's on the yj with a rubicon express 4.5 inch lift and a 1" body lift. asuming i trim a little and use the tj fender flairs.
Re: YJ flair kits
Posted: Fri Jan 13, 2012 7:34 pm
by Frank
Kevin : My CJ wheel wells are just a bit smaller than a YJ and I did alot of rear trimming and use TJ Rubicon rear flares to hide the sawzall extraction of sheet metal. The front was more reshaping the bottom rear parts of the fender. Good luck FjR68
Re: YJ flair kits
Posted: Fri Jan 13, 2012 8:35 pm
by johnsxj
Kevin,
4.5" of lift and a 1" body kit should clear 35"s without a problem.
I'll agree with Joe about using 4.88 gears. Learned that the hard way (4.56 and 35"s = not using overdrive much).
Find your 8.8" BEFORE doing any gear work/lockers!!!!! The D35 isn't really worth putting money into.
Re: YJ flair kits
Posted: Fri Jan 13, 2012 10:07 pm
by KevinP
John,
Thanks for the info. I'll get he rear OX locker for the Ford 8.8 , I wont put any money into the D35. I also think I'm gonna stick to the 33's for now. But I appreciate knowing that I can go that route in the future. Again, thanks for the help guys.
Re: YJ flair kits
Posted: Sat Jan 14, 2012 3:28 pm
by IronTortoise
You might want to talk to Kurt before commiting to the Ox. He talked me out of it.
Re: YJ flair kits
Posted: Sat Jan 14, 2012 3:41 pm
by KevinP
I only hear good things about them. What have you heard?
YJ flair kits
Posted: Sat Jan 14, 2012 7:00 pm
by ChrisD
Do u have 35's now? If not, wheel for a few years on 32-33" before going to 35's.
Re: YJ flair kits
Posted: Sat Jan 14, 2012 7:15 pm
by Kurt
The choice of your rear locker depends on if you need a selectable locker or you can live with a autolocker.
Selectables are nice for on pavement as they revert to an open diff when unlocked. They are nice on the trail as they can help in situations where it's beneficial to unlock the diff for tight turns, etc.
As John pointed out the OX cable has to be carefully routed and you need to be careful not to damage it when wheeling. The shift cable has to be well adjusted or it may not engage or dis-engage fully. They can be a little fussy in adjusting.
For me I chose to put in a Detroit autolocker as my 92 YJ is 99% a trail rig. I like the bullet proof operation and no cables, hoses or wire to get damaged. Riliable and tough.
I also run a Detroit in my 97 TJ which is 90% a street rig.
The Detroit has it's quirks on pavement. Once you are use to them it's not a big deal on the street.
Like many upgrade options there are pro's and con's to each item. It really depends on your rig's use and weight you place on the pro's and con's.
Re: YJ flair kits
Posted: Sat Jan 14, 2012 7:38 pm
by KevinP
I decided to run the 33's for a while. If i want to go 35's ill wait till the 33's wear out. Seeing as though I have yet to purchase the tires, they will be new and hopefully last a while. It will be a daily driver but I dont put more than 5,000 miles per year on my vehicles. I also have a set of winter rims and tires, so the 33's should last a couple years I hope...lol
Re: YJ flair kits
Posted: Sun Jan 15, 2012 3:21 pm
by ZAEDOCK
X2 on Detroit lockers. Fire and forget operation.
33's are a good all around size for a short wheelbase Jeep.
Re: YJ flair kits
Posted: Tue Jan 17, 2012 1:28 pm
by DDewar53
Kurt wrote:The choice of your rear locker depends on if you need a selectable locker or you can live with a autolocker.
Selectables are nice for on pavement as they revert to an open diff when unlocked. They are nice on the trail as they can help in situations where it's beneficial to unlock the diff for tight turns, etc.
As John pointed out the OX cable has to be carefully routed and you need to be careful not to damage it when wheeling. The shift cable has to be well adjusted or it may not engage or dis-engage fully. They can be a little fussy in adjusting.
For me I chose to put in a Detroit autolocker as my 92 YJ is 99% a trail rig. I like the bullet proof operation and no cables, hoses or wire to get damaged. Riliable and tough.
I also run a Detroit in my 97 TJ which is 90% a street rig.
The Detroit has it's quirks on pavement. Once you are use to them it's not a big deal on the street.
Like many upgrade options there are pro's and con's to each item. It really depends on your rig's use and weight you place on the pro's and con's.
I notice that OX now sells both an electric and an air power actuator if you don't want to deal with the cable.
http://www.4wd.com/Jeep-Drivetrain-Jeep ... OXLOXE1001
http://www.4wd.com/Jeep-Drivetrain-Jeep ... OXLOXA1001