Baystate Jeepers

So i need to mount up an ARB pump on the ABS tray under the master cylinder. I was looking at it last night and was wondering if I need to pull the tray out to be able to through bolt the pump to the platform. I cant see how I can attach more than 2 bolts to the side as I cant reach under the tray except near the edge. when I tried to remove the 4 or so bolts that hold the base of the platform to the Jeep they seem to just spin. Im guessing I can get vice grips on the outter two bolts but what about the ones on the firewall side? Any thoughts or advice on this?

Yes, you will need to pull the tray to mount the compressor. I can provide photos and exact dimensions so that you can clear the brake crap that is in the way.

Chris wrote:http://www.jeepforum.com/forum/f9/where ... r-1227719/

LOL I posted in that thread this monring...

the bolts seem to just spin in place when I loosen them.... Jeeps are fun...

Voodoo Chile wrote:

Chris wrote:http://www.jeepforum.com/forum/f9/where ... r-1227719/

LOL I posted in that thread this monring...

the bolts seem to just spin in place when I loosen them.... Jeeps are fun...

Focus your mental energies and burn them out!

I've got a crystal I can sell you to help.... Just 4 easy payments of $19.95 + S&H....



JW

I removed the tray and mounted the compressors to it on Kellys Rubi. I don't remember having a hard time with it, it was only 2 years old at the time though.
Not much help, I know.

Had to cut one bolt out with a dremmel but got it out.

Pics?

Whats an ABS platform ? FjR68