Page 1 of 1
pinion / SYE nut size?
Posted: Tue May 31, 2011 11:35 am
by Keith
Anyone know the pinion nut size on a D44 rear axle? Hows about on the SYE end? Definitely bigger than 1&1/16... but don't want to have to buy an entire set of even larger sockets. Need to tighten up both ends.
gracias.
Keith
Re: pinion / SYE nut size?
Posted: Tue May 31, 2011 12:37 pm
by ZAEDOCK
It should be 1-1/8" for the pinion nut. Not sure on your SYE nut.
Re: pinion / SYE nut size?
Posted: Tue May 31, 2011 7:19 pm
by nostaw
Call the manufacturer of the SYE... They should know....
I would guess it is 1-1/4 or less...
JW
Re: pinion / SYE nut size?
Posted: Tue May 31, 2011 7:39 pm
by johnsxj
SYE nut should either be 1 1/8 or 1 1/4 inch. Easy enough to buy singles at your local Sears.
Re: pinion / SYE nut size?
Posted: Tue May 31, 2011 11:42 pm
by Keith
thanks guys... local sears (both the ones i called) don't have... got a couple more to try tomorrow. beleive the ss sye is 1 & 1/8th too.
Re: pinion / SYE nut size?
Posted: Wed Jun 01, 2011 10:07 am
by nostaw
I carry all the sizes from 1" through 1-1/4", & 36mm and I know it is one of those -- just not which.
JW
Re: pinion / SYE nut size?
Posted: Fri Jun 03, 2011 12:45 pm
by Keith
1-1/8 is the winner! My speedometer is now working again... after a year and a bit of not. Electronic speed sensor... didnt have enough pressure on it to rotate.
but, a random clunking is still there, so time to tear in to the diff this weekend