Baystate Jeepers

They're the standard chromoly inners.

Its always been a pet peve mine that they make the outers 300m but the inners chromoly, you pay extra for the 300m inners.

mika401 wrote:Its always been a pet peve mine that they make the outers 300m but the inners chromoly, you pay extra for the 300m inners.

You certainly do...




So here's where I'm at, a few big work days next weekend, I'll be at the shop Friday - Sunday with a pretty good punch list:

* Install Atlas
* Fabricate new brackets for transmission crossmember
* If time allows, get axles located under the heep and make the comp cut

If anyone has the time to come down to Brockton and lend a hand I'll very much appreciate it! Food is on me and some cold beers if you're so inclined! Trying a bit of a trick install of the planetary shifter for the Atlas. Since the new axles don't have an e-brake (I'll be installing line locks) I'm going to be removing the e-brake assembly and set the planetary shifter in its place.

As long as things stay quiet on the home front, I can lend a hand Saturday or Sunday. Text me the address. And when it gets close, what time you'll be there. And don't say 'wicked early'. Some people think wicked early is 'the crack of noon'

oh yeah you need me to bring any tools? Or jack stands, floor jack, impact sockets,.......

Awesome, thanks a lot Carl! Saturday would be great, my goal is to spend friday cleaning the shop and doing the initial setup on the atlas so it'll be ready to go in saturday morning. I'll probably get started around 9

Saturday it is. Look forward to seeing this bad Larry, up close and personal

Carl McFly wrote:Saturday it is. Look forward to seeing this bad Larry, up close and personal

Awesome Carl!

I think it is cool you have named your Jeep Larry.

schwalby wrote:I think it is cool you have named your Jeep Larry.

Dah fawk?

Per usual, I must have missed something

Making space for the atlas...

John C.'s favorite tool!

We're in there! Relatively short time too. Big thanks to Carl and Ryan for lending a hand today! Cables are nicely adjusted, only thibg left is to fabricate a bracket for the reduction housing shifter, I'm going to put it through the slot my e-brake used to live. Pics!

Nice man... Really wish I had free time b/c I would really like to help out with these projects. Perhaps when Cam is 18 I will once again have free time.

Glad to help! Hope it's ready for RC. But it's always good to have a backup plan


Sent from my iPad using Tapatalk HD