Baystate Jeepers

I've now got death wobble. It hits around 45-50 mph, but if i accelerate smooth and slow through that speed, its fine 65-75 even over expansion joints. I'll be dropping it off for a full 4x4 alignment and tire balance at an offroad shop this week.

Anyone know if the cams and bolts from an 04 Rubicon will fit and adjust the caster on a 05 X - TJ ? FjR68

I believe last year for factory cam bolts was 99. There are companies that make aftermarket kits.

I don’t see why not. The brackets are the same, with the same slotted hole and, just no factory cam washer/bolts on the newer stuff. You should be able to use the cam bolts

The 04 call them cam bolts but there not. Why I said either go back to 99 or get aftermarket kit. Which is cheaper

Okay , so hes been driving it and said its great . Now its starting to do it again. Should I just suggest adjustable lowers or try to see if the cams I have from the 04 work. Middle of the road brand ? Who make good ones ? FjR68