You can talk about anything here
jbishop
BSJ 101 Planning Commitee
Posts: 48 Joined: Wed Nov 10, 2010 4:02 pm
Jeep Year: 1990
Jeep Model: YJ Wrangler
Unread post
by jbishop » Wed Nov 10, 2010 4:09 pm
Hi everyone.
My name is Jared and have had me jeep for about 5 years. I am looking to make some friends and hopefully get to wheel with you guys and girls, I will be sending in my application soon.
My jeep is a 90 YJ with a 4.6 stroker and EFI that I did myself. I have a factory auto in there now with hopes to upgrade soon. 33" all terrain TA's soon hope to put some mud terrains on there.
I dont have much in the way of a lift just a 4" spring kit and Swaybar disconnects.
here is a picture so everyone has something to look at
Back off man, I'm a scientist!
Hoodoo Man
BSJ 101 Planning Commitee
Posts: 3799 Joined: Fri Jan 01, 2010 11:29 am
Jeep Year: 1970
Jeep Model: C101
Real Name: Jeff Cambray
Location: Westford MA
Unread post
by Hoodoo Man » Wed Nov 10, 2010 5:01 pm
Welcome to the forum! Nice looking YJ! How do you like the stroker?
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
jbishop
BSJ 101 Planning Commitee
Posts: 48 Joined: Wed Nov 10, 2010 4:02 pm
Jeep Year: 1990
Jeep Model: YJ Wrangler
Unread post
by jbishop » Wed Nov 10, 2010 5:24 pm
Voodoo Chile wrote: Welcome to the forum! Nice looking YJ! How do you like the stroker?
it runs
my old 4.2 would cut out and this doesn't do that so in that light it is better but I don't really have a great comparison from before.
Back off man, I'm a scientist!
smileyfish
BSJ 101 Planning Commitee
Posts: 371 Joined: Fri Jan 01, 2010 12:07 pm
Jeep Model: CJ3B
Location: STILL DREAMMING OF MOAB!!
Unread post
by smileyfish » Wed Nov 10, 2010 5:34 pm
welcome!!
Kurt
BSJ Member
Posts: 4207 Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA
Unread post
by Kurt » Wed Nov 10, 2010 5:49 pm
Welcome to the forum!
My first wheeling rig was an red 89 YJ Laredo with the 4.2.
It had no get-up-and-go either
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
jbishop
BSJ 101 Planning Commitee
Posts: 48 Joined: Wed Nov 10, 2010 4:02 pm
Jeep Year: 1990
Jeep Model: YJ Wrangler
Unread post
by jbishop » Wed Nov 10, 2010 6:12 pm
I love her. She is my first Jeep and will be with me until one of us dies.
I am thinking about putting a new muffler on it. I know the pipe size is 2.25 what size inlet/outlet would I need on the muffler itself.
Back off man, I'm a scientist!
Carl McFly
BSJ Member
Posts: 2466 Joined: Wed Dec 23, 2009 11:14 pm
Jeep Year: 2000
Jeep Model: TJ Wrangler
Real Name: Carl
Location: Medford MA
Unread post
by Carl McFly » Wed Nov 10, 2010 6:13 pm
jbishop wrote:
I dont have much in the way of a lift just a 4" spring kit and Swaybar disconnects.
that's plenty! You're going to like it here. Welcome aboard!
"Roads? Where we're going, we don't need roads"
ZAEDOCK
BSJ Member
Posts: 2428 Joined: Fri Jan 01, 2010 11:18 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Unread post
by ZAEDOCK » Wed Nov 10, 2010 8:13 pm
Welcome. It's nice to see a clean YJ. I used to have one. A clean one, that is. At some point I'm going to get another one.
You'll fit in very well here.
Carl McFly wrote: X2, I agree with Joe. And not just because he's man candy
BSJ President 2003 - 2005
Frank
Frankie BSJ Member
Posts: 4145 Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5
Unread post
by Frank » Thu Nov 11, 2010 6:59 am
Welcome Jared : You will have a blast in this club. Spring lifts are better than body lifts. I cant believe you cant feel a big difference in engine power ? Mine now feels like a V-8 in the torque department. Thanks for lookin us up ! FjR68