Rubicon Auto Sway Bar Issue

[JeeperMike]

Replaced my Auto Sway bar motor and assembly due to the original not working. Still not working. Anyone have any experience repairing them or know of any electrical issues I could check? Can still unlock manually so the fun won't stop!

[BlackKnight]

It's my understanding that it's a very long-known issue. Most people just switch to a manually activated Dico adapter for the unit...

(EVO has both a Manual adapter and an On-Board-Air adapted engage)
https://evomfg.com/products/nolimits-ma ... t-jk-jl-jt

[JeeperMike]

Thank you. I appreciate the info. Nice to just push a button lol

[BlackKnight]

Can still have the push button if you have onboard air with the Air activated bypass that EVO offers...

[Marky]

Mine slowly stopped working (took longer and longer for it to engage/disengage) until I finally pulled it out and disassembled it. It was full of gunk. I cleaned all the parts, re-greased it, put it back together and reinstalled it. It's worked perfectly and that was 3 years ago. If you just replaced the unit with a known good unit (key words there!) then it could be an electrical issue. You should be able to test that with a meter or simply check the fuses. All that being said, my plan B was to install this little guy instead. https://www.amazon.com/dp/B0928RJL4B/ I didn't want to do that because I've got skids completely covering that area and access is limited to say the least.