You can talk about anything here
jquader
BSJ 101 Planning Commitee
Posts: 645 Joined: Mon Apr 05, 2010 5:57 pm
Jeep Year: 2008
Jeep Model: JK Wrangler
Real Name: Jason
Location: Fitchburg, MA
Unread post
by jquader » Tue Jun 08, 2010 7:58 pm
She's now on 35" Super Swampers with a 1" body lift.
Guess I'll have to start trimming the tree a little higher now.
Alloy front shaft go in next week.
BSJ Secretary 2019, 2013, 2012 - DOT 2015 - DOE 2017, 2016
I wonder what's on the other side.
Carl McFly
BSJ Member
Posts: 2466 Joined: Wed Dec 23, 2009 11:14 pm
Jeep Year: 2000
Jeep Model: TJ Wrangler
Real Name: Carl
Location: Medford MA
Unread post
by Carl McFly » Tue Jun 08, 2010 8:10 pm
.................. lookin good stud
"Roads? Where we're going, we don't need roads"
jquader
BSJ 101 Planning Commitee
Posts: 645 Joined: Mon Apr 05, 2010 5:57 pm
Jeep Year: 2008
Jeep Model: JK Wrangler
Real Name: Jason
Location: Fitchburg, MA
Unread post
by jquader » Tue Jun 08, 2010 8:14 pm
Carl McFly wrote: .................. lookin good stud
You'd think Lou could have washed it for me....
I get wait to hear him complain about the mud in the axle tubes.
BSJ Secretary 2019, 2013, 2012 - DOT 2015 - DOE 2017, 2016
I wonder what's on the other side.
Kurt
BSJ Member
Posts: 4207 Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA
Unread post
by Kurt » Tue Jun 08, 2010 8:29 pm
Looks great on the new sneakers
She'll be all set for Rausch after the alloys go in.
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
Hoodoo Man
BSJ 101 Planning Commitee
Posts: 3799 Joined: Fri Jan 01, 2010 11:29 am
Jeep Year: 1970
Jeep Model: C101
Real Name: Jeff Cambray
Location: Westford MA
Unread post
by Hoodoo Man » Tue Jun 08, 2010 8:54 pm
DAMN NICE!
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
ChrisD
BSJ 101 Planning Commitee
Posts: 1791 Joined: Wed Dec 23, 2009 12:53 pm
Jeep Year: 2003
Jeep Model: TJ Wrangler
Real Name: Chris
Location: Westminster, Ma
Unread post
by ChrisD » Tue Jun 08, 2010 9:09 pm
Nice....
What do you have for a lift?
jquader
BSJ 101 Planning Commitee
Posts: 645 Joined: Mon Apr 05, 2010 5:57 pm
Jeep Year: 2008
Jeep Model: JK Wrangler
Real Name: Jason
Location: Fitchburg, MA
Unread post
by jquader » Tue Jun 08, 2010 9:19 pm
Chris wrote: Nice....
What do you have for a lift?
2 1/2" Teraflex Budget Boost. Give a JK a great amount of lift/flex for the price.
BSJ Secretary 2019, 2013, 2012 - DOT 2015 - DOE 2017, 2016
I wonder what's on the other side.
ZAEDOCK
BSJ Member
Posts: 2428 Joined: Fri Jan 01, 2010 11:18 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Unread post
by ZAEDOCK » Tue Jun 08, 2010 9:40 pm
jquader wrote: She's now on 35" Super Swampers
Compact spares huh?
J/K man. Looks pissah. You're gonna enjoy the extra diameter and how easier it rolls compared to 33's.
Carl McFly wrote: X2, I agree with Joe. And not just because he's man candy
BSJ President 2003 - 2005
jquader
BSJ 101 Planning Commitee
Posts: 645 Joined: Mon Apr 05, 2010 5:57 pm
Jeep Year: 2008
Jeep Model: JK Wrangler
Real Name: Jason
Location: Fitchburg, MA
Unread post
by jquader » Tue Jun 08, 2010 9:53 pm
ZAEDOCK wrote: jquader wrote: She's now on 35" Super Swampers
Compact spares huh?
J/K man. Looks pissah. You're gonna enjoy the extra diameter and how easier it rolls compared to 33's.
The spare is still a 33. Couldn't get Marky to pony up the extra money.
I won't run out of rpm before I run out of power on the highway anymore.
BSJ Secretary 2019, 2013, 2012 - DOT 2015 - DOE 2017, 2016
I wonder what's on the other side.
ChrisD
BSJ 101 Planning Commitee
Posts: 1791 Joined: Wed Dec 23, 2009 12:53 pm
Jeep Year: 2003
Jeep Model: TJ Wrangler
Real Name: Chris
Location: Westminster, Ma
Unread post
by ChrisD » Tue Jun 08, 2010 11:58 pm
Makes me wonder if my 3" lift + 1BL will fit 35's???
Hoodoo Man
BSJ 101 Planning Commitee
Posts: 3799 Joined: Fri Jan 01, 2010 11:29 am
Jeep Year: 1970
Jeep Model: C101
Real Name: Jeff Cambray
Location: Westford MA
Unread post
by Hoodoo Man » Wed Jun 09, 2010 8:21 am
Chris keep in mind my stock JK has 32s so running up to 35s isnt too hard with minimal lift. That said I think you would be able to run 35s with a little rub with that setup from what ive seen and read... I think you need 4"-5" to run 35s on a TJ....
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
Captian Carnage
BSJ 101 Planning Commitee
Posts: 344 Joined: Fri Jan 01, 2010 1:08 pm
Jeep Year: 2004
Jeep Model: TJ Wrangler
Unread post
by Captian Carnage » Wed Jun 09, 2010 1:15 pm
jpcamb wrote: Chris keep in mind my stock JK has 32s so running up to 35s isnt too hard with minimal lift. That said I think you would be able to run 35s with a little rub with that setup from what ive seen and read... I think you need 4"-5" to run 35s on a TJ....
For a TJ a 4in lift will do it I ran a 3 1/2 RE and a 1 in BL No problems I ran 36s with that The front will rub a little on the inner fender I had a spot 3 inches high x 2 inch wide at Full flex I am still running the same set up with a high line fender kit
With 35 inch Tires a D35 will not last The ring gear is the weak link
Carl McFly
BSJ Member
Posts: 2466 Joined: Wed Dec 23, 2009 11:14 pm
Jeep Year: 2000
Jeep Model: TJ Wrangler
Real Name: Carl
Location: Medford MA
Unread post
by Carl McFly » Wed Jun 09, 2010 5:39 pm
Chris wrote: Makes me wonder if my 3" lift + 1BL will fit 35's???
LOL!!! How long you had those Kevlars?
Oh yeah, prolly about as long as I had my 31's!
"Roads? Where we're going, we don't need roads"
Hoodoo Man
BSJ 101 Planning Commitee
Posts: 3799 Joined: Fri Jan 01, 2010 11:29 am
Jeep Year: 1970
Jeep Model: C101
Real Name: Jeff Cambray
Location: Westford MA
Unread post
by Hoodoo Man » Wed Jun 09, 2010 6:09 pm
Captian Carnage wrote: jpcamb wrote: Chris keep in mind my stock JK has 32s so running up to 35s isnt too hard with minimal lift. That said I think you would be able to run 35s with a little rub with that setup from what ive seen and read... I think you need 4"-5" to run 35s on a TJ....
For a TJ a 4in lift will do it I ran a 3 1/2 RE and a 1 in BL No problems I ran 36s with that The front will rub a little on the inner fender I had a spot 3 inches high x 2 inch wide at Full flex I am still running the same set up with a high line fender kit
With 35 inch Tires a D35 will not last The ring gear is the weak link
pretty sure Chris has a d44 out back...
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
ChrisD
BSJ 101 Planning Commitee
Posts: 1791 Joined: Wed Dec 23, 2009 12:53 pm
Jeep Year: 2003
Jeep Model: TJ Wrangler
Real Name: Chris
Location: Westminster, Ma
Unread post
by ChrisD » Wed Jun 09, 2010 6:30 pm
Carl McFly wrote: Chris wrote: Makes me wonder if my 3" lift + 1BL will fit 35's???
LOL!!! How long you had those Kevlars?
Oh yeah, prolly about as long as I had my 31's!
next month will be 1yr and still haven't put 3k miles on them.