Clinton Powder Coating

[ImNotCassie]

Mark (MDSRACING...), You mentioned a place in Clinton for powder coating. Is it Central Mass Powder Coating? There are many places, I'm sure but I would rather use a place others have used and can recommend. Their quote seems reasonable ... but then again I don't have anything to go by.

[RalphTomaccio]

I used this guy a couple of times and can recommend him. He does this at his home in his spare time and is very fair in his pricing.

Midnight Powder Coating
Phil Newcomb - 508.328.5176

Here is a link with others that have used him with samples of his work:

http://www.nestreetriders.com/forum/f8/ ... 49645.html

[MDSRACING398]

Yes central mass powder coating they do it right guarantee everything. They have done all my jeep stuff and Matt's dirt bike stuff through the years.Never once had a peeling issue. They sandblast it, galvanized coat it then powder it with color. They have a industrial black texture that is super strong will match your bumper. Should be about 200 I would guess for your rails.

[ImNotCassie]

Thanks guys. Jeff @ CMPC said $300, can do the inserts a second color if I choose and it takes about a week. If I can get them mounted and holes drilled in the right spots tonight/tomorrow, I'll try to drop them off Friday so hopefully have them back by the 1st. It would be nice to have them on for Moose Mountain but I don't want to use them as bare metal.
What are your thoughts on doing all the hole drilling and mounting AFTER the powder coat is on, probably damage the finish right?

[MDSRACING398]

Isn't the 1st Saturday?

[ImNotCassie]

LOL yes it is, I meant the following Saturday, Brookridge clean up.

[RandyCarol]

What did you end up getting for rails?

[ImNotCassie]

What did you end up getting for rails?

The Poison Sypder Rocker Knockers, the ones in the first link I posted. Can't wait to get them put on.

[ImNotCassie]

I'm happy when I get to buy stuff for my rig and the icing on the cake is I get to buy a few new tool too.

[Frank]

The Hook has been set ! FjR68

[RalphTomaccio]

The Hook has been set ! FjR68

And this isn't a case of "Catch & Release"! Once hooked, you're dead in the water.

[pirahnah3]

Nah once you get into tools the hook is well set.

[ImNotCassie]

I have always been into tools, just couldn't justify buying them until now. I have had a little stick welder for years and I don't even know how to use it.

[RandyCarol]

What did you end up getting for rails?

The Poison Sypder Rocker Knockers, the ones in the first link I posted. Can't wait to get them put on.

Those are body mounted, have you checked the fit with your crunchy rocker? Good choice by the way, I'm considering the same ones.

[ImNotCassie]

Lol crunchy rocker Haha. I considered that so got the frame mounted version.