Question ?

User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Question ?

Unread post by Frank »

I have the frame fixed and just received the poly bushing kit I ordered as mine went south . There are sleeves for the spring eye (big end) and none for the shackle end. Is there not a need for them in the small ones ? Those are the ones that disintegrated , twice now ! I have cross drilled 1/2" bolts (grease-able) so that shouldnt be the reason. Whats your take on this ? FjR68
User avatar
Kurt
BSJ Member
Posts: 4209
Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA

Re: Question ?

Unread post by Kurt »

I believe I have sleeves in all my leaf springs eyes and frame mounts on my YJ.
Part of the purpose of the sleeves is to limit how far the bolt gets tightened and limits how much the bushing gets smushed by the shackle or frame mount.
Maybe the grease used caused the bushings to breakdown?
If your bolts fit snugly in the bushings and you properly tighten them then I don't see a need for the sleeves.
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: Question ?

Unread post by Frank »

The bolts do fit snug with resistance dry as you push them in while holding them . Daystar says impervious to grease ,oil, and a bunch of stuff (sunlight) . I will give it another shot. I do have sleeves from something else and may cut them down for width . Thanks FjR68
Post Reply