Wrenchfest - A Request for a Few Good Members
- RalphTomaccio
- BSJ 101 Planning Commitee
- Posts: 1251
- Joined: Sun Sep 29, 2013 9:50 am
- Jeep Year: 2012
- Jeep Model: JK Wrangler
- Location: Slatersville RI
Re: Wrenchfest - A Request for a Few Good Members
Hey, Jeff.
I remember those having work done on their Jeeps last year contributed some money to the owner for the use of his garage. How much do you feel would be appropriate in my case since I'm sure my project is the major one?
I remember those having work done on their Jeeps last year contributed some money to the owner for the use of his garage. How much do you feel would be appropriate in my case since I'm sure my project is the major one?
- RalphTomaccio
- BSJ 101 Planning Commitee
- Posts: 1251
- Joined: Sun Sep 29, 2013 9:50 am
- Jeep Year: 2012
- Jeep Model: JK Wrangler
- Location: Slatersville RI
Re: Wrenchfest - A Request for a Few Good Members
I found a Firestone dealer near me that offers lifetime wheel alignments for $179.00. Like you said, for the cost of two alignments, you get lifetime as they normally charge $89.00 for one. I have an appointment Monday morning.BlackNBlue-ISH wrote:If you've got Sullivan tire down in RI, I'd get their lifetime alignments. Basically you pay for two alignments and get alignments on that VIN for the entire ownership of it. We've got at least two of those shops in the Hudson/Nashua area, and they have Saturday hours.
- BlackNBlue-ISH
- BSJ Member
- Posts: 1824
- Joined: Mon Mar 24, 2014 12:25 pm
- Jeep Year: 2005
- Jeep Model: TJ Wrangler
- Real Name: Daniel or "ish"
- Location: Manchester, NH
Re: Wrenchfest - A Request for a Few Good Members
Awesome! Double check to make sure you can get that done at any firestone dealer and not just the one you sign up with. I know I can go to any Sullivans for mine.RalphTomaccio wrote:I found a Firestone dealer near me that offers lifetime wheel alignments for $179.00. Like you said, for the cost of two alignments, you get lifetime as they normally charge $89.00 for one. I have an appointment Monday morning.BlackNBlue-ISH wrote:If you've got Sullivan tire down in RI, I'd get their lifetime alignments. Basically you pay for two alignments and get alignments on that VIN for the entire ownership of it. We've got at least two of those shops in the Hudson/Nashua area, and they have Saturday hours.
2005 TJ, built and beat accordingly
- ASauer17
- BSJ BOD President
- Posts: 3151
- Joined: Fri Apr 08, 2011 12:32 pm
- Jeep Year: 1998
- Jeep Model: TJ Wrangler
- Real Name: Amanda
- Location: Hubbardston ma
Re: Wrenchfest - A Request for a Few Good Members
Anyone like banana oatmeal bread?? Thinking of bringing that.
98/99 TJ
2025 President
----------------------------------------
2023 & 2024 President
2021 Director of Events
2018 Secretary
2016 & 2017 President
2014 & 2015 Secretary
2025 President
----------------------------------------
2023 & 2024 President
2021 Director of Events
2018 Secretary
2016 & 2017 President
2014 & 2015 Secretary
- RalphTomaccio
- BSJ 101 Planning Commitee
- Posts: 1251
- Joined: Sun Sep 29, 2013 9:50 am
- Jeep Year: 2012
- Jeep Model: JK Wrangler
- Location: Slatersville RI
Re: Wrenchfest - A Request for a Few Good Members
Here is another alternative for directions to the shop:Voodoo Chile wrote:ADDRESS 28.5 Groton Rd Westford MA 01886
Note : Groton Rd in Westford MA The access road for the shop is a long dirt driveway up a slight incline between 28 and 30 Groton Rd, its a large blue industrial building with heavy equipment outside, as you go down Groton Rd headed toward Groton on the right hand side you will see a small pond and a circular driveway followed by 4 mailboxes together, the access road is immediately after the 4 mail boxes. they are listed as 6 Millstone hill rd but its a sharp turn and easy to miss it. I will post my cell number when we get closer to Saturday..
42.606708° -71.487485°
See you all in the morning.
Jeff, if you would provide your phone number, just in case.
Thanks!
- ASauer17
- BSJ BOD President
- Posts: 3151
- Joined: Fri Apr 08, 2011 12:32 pm
- Jeep Year: 1998
- Jeep Model: TJ Wrangler
- Real Name: Amanda
- Location: Hubbardston ma
Re: Wrenchfest - A Request for a Few Good Members
final confirmation for start time at 9.
ralph- lift, bleed brakes
carl- front extension brake lines
me- fog lights not working?
ralph- lift, bleed brakes
carl- front extension brake lines
me- fog lights not working?
98/99 TJ
2025 President
----------------------------------------
2023 & 2024 President
2021 Director of Events
2018 Secretary
2016 & 2017 President
2014 & 2015 Secretary
2025 President
----------------------------------------
2023 & 2024 President
2021 Director of Events
2018 Secretary
2016 & 2017 President
2014 & 2015 Secretary
- RalphTomaccio
- BSJ 101 Planning Commitee
- Posts: 1251
- Joined: Sun Sep 29, 2013 9:50 am
- Jeep Year: 2012
- Jeep Model: JK Wrangler
- Location: Slatersville RI
Re: Wrenchfest - A Request for a Few Good Members
I was just reading through the lift install instructions and came across a section regarding the front bump stops. It says that a 7/16ths hole needs to be drilled in the center of the spring pad, then tapped to 1/2" x 13 for the supplied hardware.
Any of you fine folks that are coming have a tap in these dimensions they can bring tomorrow?
Any of you fine folks that are coming have a tap in these dimensions they can bring tomorrow?
- Kurt
- BSJ Member
- Posts: 4209
- Joined: Wed Dec 23, 2009 11:53 am
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
- Real Name: Kurt K.
- Location: Pepperell, MA
Re: Wrenchfest - A Request for a Few Good Members
I'll bring my drills and a set of taps.
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
- Hoodoo Man
- BSJ 101 Planning Commitee
- Posts: 3799
- Joined: Fri Jan 01, 2010 11:29 am
- Jeep Year: 1970
- Jeep Model: C101
- Real Name: Jeff Cambray
- Location: Westford MA
Re: Wrenchfest - A Request for a Few Good Members
RalphTomaccio wrote:Here is another alternative for directions to the shop:Voodoo Chile wrote:ADDRESS 28.5 Groton Rd Westford MA 01886
Note : Groton Rd in Westford MA The access road for the shop is a long dirt driveway up a slight incline between 28 and 30 Groton Rd, its a large blue industrial building with heavy equipment outside, as you go down Groton Rd headed toward Groton on the right hand side you will see a small pond and a circular driveway followed by 4 mailboxes together, the access road is immediately after the 4 mail boxes. they are listed as 6 Millstone hill rd but its a sharp turn and easy to miss it. I will post my cell number when we get closer to Saturday..
42.606708° -71.487485°
See you all in the morning.
Jeff, if you would provide your phone number, just in case.
Thanks!
Those coordinates are a 10 minute walk from the actual shop....
my cell is 978 seven27 three494 if anyone gets lost..... See you in the a.m!
Jeff
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
- schwalby
- BSJ 101 Planning Commitee
- Posts: 1677
- Joined: Fri Jan 01, 2010 1:38 pm
- Jeep Year: 2003
- Jeep Model: TJ Wrangler
- Real Name: Josh (Wife is Jen)
- Location: Northwood NH
Re: Wrenchfest - A Request for a Few Good Members
I think he meant this.
42.606896, -71.487261
42.606896, -71.487261
Josh Schwalb
ArticRubi wrote:Remember: poor planning on my part constitutes an emergency on yours.
- Hoodoo Man
- BSJ 101 Planning Commitee
- Posts: 3799
- Joined: Fri Jan 01, 2010 11:29 am
- Jeep Year: 1970
- Jeep Model: C101
- Real Name: Jeff Cambray
- Location: Westford MA
Re: Wrenchfest - A Request for a Few Good Members
42.606896, -71.487261 would put you at the spot... was just figuring out how to get google to tell me that.
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
- RalphTomaccio
- BSJ 101 Planning Commitee
- Posts: 1251
- Joined: Sun Sep 29, 2013 9:50 am
- Jeep Year: 2012
- Jeep Model: JK Wrangler
- Location: Slatersville RI
Re: Wrenchfest - A Request for a Few Good Members
I was curious how much difference there was between my co-ordinates and the one you provided. Here's what Google Earth came up with. Any idea why such a discrepancy? More like a 10 second walk:Voodoo Chile wrote:Those coordinates are a 10 minute walk from the actual shop....
my cell is 978 seven27 three494 if anyone gets lost..... See you in the a.m!
Jeff
- schwalby
- BSJ 101 Planning Commitee
- Posts: 1677
- Joined: Fri Jan 01, 2010 1:38 pm
- Jeep Year: 2003
- Jeep Model: TJ Wrangler
- Real Name: Josh (Wife is Jen)
- Location: Northwood NH
Re: Wrenchfest - A Request for a Few Good Members
Those are my coordinates. Your were 42.606708 -71.487485
Josh Schwalb
ArticRubi wrote:Remember: poor planning on my part constitutes an emergency on yours.
- BlackNBlue-ISH
- BSJ Member
- Posts: 1824
- Joined: Mon Mar 24, 2014 12:25 pm
- Jeep Year: 2005
- Jeep Model: TJ Wrangler
- Real Name: Daniel or "ish"
- Location: Manchester, NH
Re: Wrenchfest - A Request for a Few Good Members
Have a great time all! I wish I could be there, but I'll be stuck working. Gotta pay the bills somehow.
2005 TJ, built and beat accordingly
- Carl McFly
- BSJ Member
- Posts: 2466
- Joined: Wed Dec 23, 2009 11:14 pm
- Jeep Year: 2000
- Jeep Model: TJ Wrangler
- Real Name: Carl
- Location: Medford MA
Re: Wrenchfest - A Request for a Few Good Members
See you in the morning(ish). Won't be there at 9, but I will be there. Have a few things to take care of first
"Roads? Where we're going, we don't need roads"