New applicant

New to BSJ? We're glad to have you! Drop a line and introduce yourself to everyone here!
** NO TRAIL NAMES **

Moderator: Kurt

Forum rules
Please post a pic of your jeep.

Tell us about the mods you have made.

Tell us about the mods you hope to make in the future.

How long have you been a member of Baystate?

How long have you been offroading?

Is this your first jeep?

AND REMEMBER ** NO TRAIL NAMES **
User avatar
Cheever3
BSJ 101 Planning Commitee
Posts: 35
Joined: Tue Dec 09, 2014 8:41 pm
Jeep Year: 2012
Jeep Model: JK Wrangler
Real Name: Bill
Location: Billerica, MA

New applicant

Unread post by Cheever3 »

Hello everyone,

My name is Bill and I live in Billerica. I own a 2012 jk unlimited, 6spd. 3.21 gears. There hasn't been much in the upgrade department except for some smitty rocker guards

My girlfriend Brianna and I love to take road trips and the jeep has been great for that. Much of our trips have been centered around visiting National Parks. It was after visiting Arches and Canyonlands in Moab where our real interest in offroading came on.

We do not have a large amount of offroading experience and this is why we mailed our club application a few weeks ago. We are getting married this summer and will be taking our honeymoon/road trip out west to Colorado, Utah, and California to name a few places. We would love to build our experience offroading so we can enjoy some time off the pavement.

The jeep is my daily driver and I put about 250 miles a week on it. Looking to upgrade for capability but not to sacrifice reliability as the miles do rack up.

Was close to pulling the trigger on TF 3 inch lift but I'd appreciate any opinions or ideas.
http://www.quadratec.com/products/16194_011X_PG.htm

Also looking to beef up the wheel and tire combo as I'm approaching 50k on these

Thanks,

Bill and Brianna
Attachments
image.jpg
image.jpg (27.82 KiB) Viewed 6192 times
User avatar
schwalby
BSJ 101 Planning Commitee
Posts: 1677
Joined: Fri Jan 01, 2010 1:38 pm
Jeep Year: 2003
Jeep Model: TJ Wrangler
Real Name: Josh (Wife is Jen)
Location: Northwood NH

Re: New applicant

Unread post by schwalby »

Welcome.

Jealous of your cross country honeymoon. Some day when I rack up enough vacation time would love to do it with my wife.

Personally I like the BDS, JKS and Clayton products. I have BDS and JKS stuff on my TJ and they have been great. That is if you are going short arm.

For long arm you can't beat Clayton products IMO. He does have a 3.5" kit but it is about a grand more then the kit you linked. However if the budget is there it might be worth. Long arm usually improves pavement driving too because of the angles you achieve.

Just my 2 cents though.
Josh Schwalb
ArticRubi wrote:Remember: poor planning on my part constitutes an emergency on yours.
User avatar
Hoodoo Man
BSJ 101 Planning Commitee
Posts: 3799
Joined: Fri Jan 01, 2010 11:29 am
Jeep Year: 1970
Jeep Model: C101
Real Name: Jeff Cambray
Location: Westford MA

Re: New applicant

Unread post by Hoodoo Man »

not a big fan of Terra Flex myself. some of the componets in my current lift (mostly the springs) are TF and I will be replacing them soon.

With the 3.21 gears you wont want to go any larger than 33s, honestly you can easily do a budget boost to make the lift a lot cheaper, get to know the jeep a little before you sink a lot of $$ into a lift. You will want to regear if you go to 35s etc. I have duratracs from good year on my JKU and only rub a little with no lifts and 33s. Save up for a Clayton or BDS as Josh says. You wont like big hills with those gears out west.... I have 3.73s and its still fine for highway and most hills but that would be a waste of a gearing update. I only lost about 1mpg going from stock tires to the duratracs and have logged about 6-10k on them, wear fine and did well on some very easy class VI roads covered in snow and ice this weekend....
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
User avatar
Cheever3
BSJ 101 Planning Commitee
Posts: 35
Joined: Tue Dec 09, 2014 8:41 pm
Jeep Year: 2012
Jeep Model: JK Wrangler
Real Name: Bill
Location: Billerica, MA

Re: New applicant

Unread post by Cheever3 »

Thank you both for the input. I'll definitely be checking out the BDS and Clayton products.

Duratracs have been at the top of the list for a tire upgrade. Hoping the 33s won't be too sluggish on our trip but I can't see myself going with something smaller.

"Orange whip, orange whip, orange whip...three orange whips"
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: New applicant

Unread post by Frank »

Bill : Welcome to Baystate ! There is a tire Vs. Ratio chart , you can look up what the stock RPMs is and look at what it will be with 33s, More than 300 RPM drop will be felt ,(lack of power) A 300/600 RPM gain would be where you want to end up. Not costing fuel mileage or noise,vibrations. Any after market more aggressive tread tire will help off road but you will sacrifice on road in fuel and or noise , overall wear of the tire. There is no one place to start as there seams to be a bazillion we all want to do to them. Seat time will give you the most experience and this club was built on that principal , We were all new and although it took longer than I would have liked , I was taught well and my Jeep has survived almost without any scars to speak of. You folks will have a blast. See ya on a trail . FjR68
User avatar
DDewar53
BSJ 101 Planning Commitee
Posts: 927
Joined: Fri Jan 01, 2010 3:41 pm
Jeep Year: 1990
Jeep Model: YJ Wrangler

Re: New applicant

Unread post by DDewar53 »

Hi Bill, and welcome to the club. My name's Don, I drive an '09 JK 2-door for off-roading (the wife has a '14 JK Unlimited that we use as a DD). I drove mine with a 2" budget boost and 32" Toyo Open Country ATs for years with the club, including a trip to Moab back in 2009. The Jeep went everywhere I pointed it that whole time. I recently upgraded to 35" Toyo Open Country ATs, after regearing, but I'm still running them on the 2" budget boost and Xenon flat fender flares - and no rubbing. No need to go to a 3" kit for 35's. I'm thinking of replacing the springs and shocks this year with 2" springs, and getting rid of the spacers, but I won't be going any higher.

See you on the trails...
Pacifism is a shifty doctrine under which a man accepts the benefits of the social group without being willing to pay - and claims a halo for his dishonesty.

Robert A. Heinlein
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: New applicant

Unread post by Frank »

I would think that a lift is more important for a 4 door simply it has to over come the wheel base . My 2c FjR68
User avatar
Hoodoo Man
BSJ 101 Planning Commitee
Posts: 3799
Joined: Fri Jan 01, 2010 11:29 am
Jeep Year: 1970
Jeep Model: C101
Real Name: Jeff Cambray
Location: Westford MA

Re: New applicant

Unread post by Hoodoo Man »

Cheever3 wrote: "Orange whip, orange whip, orange whip...three orange whips"
:bluesbros:

God I miss John Candy...
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
User avatar
Cheever3
BSJ 101 Planning Commitee
Posts: 35
Joined: Tue Dec 09, 2014 8:41 pm
Jeep Year: 2012
Jeep Model: JK Wrangler
Real Name: Bill
Location: Billerica, MA

Re: New applicant

Unread post by Cheever3 »

Thanks again for the input.
Frank wrote:I would think that a lift is more important for a 4 door simply it has to over come the wheel base . My 2c FjR68
Prioritizing is the biggest challenge but a lift is at the top of the list.

Josh and Joliet: checked out the BDS line of products and I was impressed. I like how they provide you with customizable kits. Although the list of addons never ends. I like the warranty too.


http://bds-suspension.com/product?ma=7& ... &kid=1403H

This fits the budget and lends itself easily to upgrades. Just curious as to how this would affect the geometry of the drive shaft without upper and lowers?...they are available add ons but not sure if they are necessary at this point.

We all miss John Candy
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: New applicant

Unread post by Frank »

There is no magic number when it comes to a lift. Every time we change how it was made , we need to correct something . It could be a drift , a vibration , a clunk. Over the years weve learned to call this QUIRKS . You know its going to drift right if you hit that kind of bump. You live with it but if a friend drives it , they think somethings wrong. Complete lift kit are thought out and some of them (BDS) very well. You just might not need everything all at once. Again , if you notice a vibration that wasnt there it warrants lookin at it. If the steering pulls , you have it alined . I think you will be good to go with your wheel base. Other JK owners will fill in the blanks for you as you go. FjR68
User avatar
BlackNBlue-ISH
BSJ Member
Posts: 1824
Joined: Mon Mar 24, 2014 12:25 pm
Jeep Year: 2005
Jeep Model: TJ Wrangler
Real Name: Daniel or "ish"
Location: Manchester, NH

New applicant

Unread post by BlackNBlue-ISH »

In my opinion, the first three items needed for a new stock jeep should be one of the following: chunkier tires, small/moderate lift, skid plates.

Reasons for each:
Chunkier tires are good for traction. If you don't have traction, you don't go anywhere, regardless of lift and skids. Tires = control.

Small/moderate lift help get the entire frame and components a bit higher and allow for the suspension to better tackle harsher terrain. If you can keep the tires on the ground while crawling, maintaining the traction from tires is much easier.

Skids. Protect that which you paid for. Critical components, wether you have a lift or not, still need to be protected.


The order of each of these is entirely up to you and what your budget allows.


Sent from my iPhone using Tapatalk
2005 TJ, built and beat accordingly
User avatar
Marky
BSJ Member
Posts: 1891
Joined: Fri Jan 01, 2010 4:41 pm
Jeep Year: 2013
Jeep Model: JK Wrangler
Real Name: Marky
Location: Fitchburg

Re: New applicant

Unread post by Marky »

I agree with ish. I opted to protect first. The reality of a lift is that with more clearance you're going to be inclined to drive over larger obstacles, placing your undercarriage in harm's way regardless. Money is always an obstacle so there's no sense in wasting it replacing components you mangled that are eventually going to be protected anyway - just protect them and use the time to gain some experience with your rig and then make informed decisions about what kinds of upgrades make the most sense for the types of terrain you plan to drive (pavement included.). Ask club members what they've installed and why. For giggles, ask them what they've installed in the past that's no longer on the rig and consider why that is (there's a million reasons to upgrade, not all of them involve mistakes, but you can use other's experiences to guide your decisions.)

Right off the bat I installed control arm skids (don't go cheap, I've had to replace mine already because I went cheap - see my previous paragraph!), oil pan and tranny skid, curly Q exhaust, muffler, evap canister and finally a skid to protect the sway bar disconnect motor (rubi). I then wheeled it that way for most of the year.

Later I added a custom bumper/winch and a 2.5" lift. I went with 2.5 to keep it street-friendly and to avoid geometry problems. Elias installed it for me, and it drives the same way it did before the lift - no issues whatsoever. I'm still on the stock rubi tires and it goes pretty much wherever I point it. And if it doesn't I can pull out the winch. I've only needed that once, but boy did that come in handy that time!!

After taking out my steering stabilizer at Rausch Creek I installed a relocation bracket to keep that little guy safe.

My next purchases will be 34" tires and a gas tank skid. So far I've only lost a small amount of mileage. I'm still getting about 19mpg overall. I expect to lose more with the tire upgrade, which is part of my hesitation... Just for the record, despite all the armor I added, I seemed to lose the most mileage due to the lift.


Sent from my stupid iThingy using Tapatalk.
2014-19 Vice President
Other positions: DOE, At-Large
2013 JK Rubicon, 3" lift, 35" tires, lots of armor
User avatar
Cheever3
BSJ 101 Planning Commitee
Posts: 35
Joined: Tue Dec 09, 2014 8:41 pm
Jeep Year: 2012
Jeep Model: JK Wrangler
Real Name: Bill
Location: Billerica, MA

Re: New applicant

Unread post by Cheever3 »

Thanks for the input everyone. The long wish list/to do list is underway.

Since you mentioned Elias I'm looking for a reliable shop. I'm in Billerica so Townsend is about an hour. A buddy of mine recommended Motorworx in Peabody but that's close to an hour as well...

If anyone knows of a place closer they use I'd appreciate the tip.
User avatar
mrfreakinwhite
BSJ 101 Planning Commitee
Posts: 447
Joined: Thu Jun 27, 2013 7:15 pm
Jeep Year: 1998
Jeep Model: XJ Cherokee
Location: Lunenburg, MA

Re: New applicant

Unread post by mrfreakinwhite »

I work at Elias and people come here from all over the north east.

You can read forums all you'd like, but do you want to listen to one person that has one, two or three Jeeps under their belt or listen to people that do all Jeeps, all day, week after week?

You should not expect driving quirks after lifting a JK. If it is done correctly, it will drive correctly. JKs don't tolerate those quirks very much, and 2012 and newer JKs will go into limp mode if your "quirk" is electronically interpreted as a safety issue.

We're a BDS dealer, too, and if you want our opinion we've installed many of their lift kits, as well as AEV, Teraflex, TnT, Clayton, JKS, Zone and more.

It is all about compromises, what can wait until later and what is really a priority. Some mods lend themselves to additional mods in a package, some are completely stand alone. Some mods you do FIRST and will need fine tuning all the way through from 33s to Infinity and Beyond, but stay with your vehicle all the way through and keep it running right. Other mods could push you over an edge of no return and ruin what the JK has to offer on the street.

The theory of start small and work your way up as your ability increases is completely sound logic. I have seen a lot of people WAY over their heads in vehicles that can do more than the driver can do safely.

978 597 8432
User avatar
BlackNBlue-ISH
BSJ Member
Posts: 1824
Joined: Mon Mar 24, 2014 12:25 pm
Jeep Year: 2005
Jeep Model: TJ Wrangler
Real Name: Daniel or "ish"
Location: Manchester, NH

Re: New applicant

Unread post by BlackNBlue-ISH »

mrfreakinwhite wrote:I work at Elias and people come here from all over the north east.

You can read forums all you'd like, but do you want to listen to one person that has one, two or three Jeeps under their belt or listen to people that do all Jeeps, all day, week after week?

You should not expect driving quirks after lifting a JK. If it is done correctly, it will drive correctly. JKs don't tolerate those quirks very much, and 2012 and newer JKs will go into limp mode if your "quirk" is electronically interpreted as a safety issue.

We're a BDS dealer, too, and if you want our opinion we've installed many of their lift kits, as well as AEV, Teraflex, TnT, Clayton, JKS, Zone and more.

It is all about compromises, what can wait until later and what is really a priority. Some mods lend themselves to additional mods in a package, some are completely stand alone. Some mods you do FIRST and will need fine tuning all the way through from 33s to Infinity and Beyond, but stay with your vehicle all the way through and keep it running right. Other mods could push you over an edge of no return and ruin what the JK has to offer on the street.

The theory of start small and work your way up as your ability increases is completely sound logic. I have seen a lot of people WAY over their heads in vehicles that can do more than the driver can do safely.

978 597 8432
I'm sold!


Sent from my iPhone using Tapatalk
2005 TJ, built and beat accordingly
Post Reply