Hello from Waltham

New to BSJ? We're glad to have you! Drop a line and introduce yourself to everyone here!
** NO TRAIL NAMES **

Moderator: Kurt

Forum rules
Please post a pic of your jeep.

Tell us about the mods you have made.

Tell us about the mods you hope to make in the future.

How long have you been a member of Baystate?

How long have you been offroading?

Is this your first jeep?

AND REMEMBER ** NO TRAIL NAMES **
DesAutels
BSJ 101 Planning Commitee
Posts: 1
Joined: Sat Aug 11, 2012 10:57 am
Jeep Year: 2011
Jeep Model: JK Wrangler

Hello from Waltham

Unread post by DesAutels »

Hi, Michele and I just mailed in our memberships. We are a 3-jeep family - 2011 JK Unlimited, 2012 JK Rubicon and a 1955 CJ5 in mostly-stock trim for puttering about town. We have been offroading on and off for years, but decided to jump back in to it very activly now that we have a bit more time.

The Mango Bus above is my 2011 JK Unlimited that started life as a chipper chicken Sport. It has 4.88 gears with a Teraflex D44 with Synnergy ball joints, RCV 35 spline shafts, ARB air locker, Currie tie rods and Teraflex Big Brakes up front and a Teraflex D60 with ARB in the rear. Reel CV driveshafts front and rear. 3" full traction lift with Bilstein shocks and 35's for suspension. LOD front and rear bumbeps, LOD rock rails, River raider skids for protection. Flat fenders courtesy of my Sawzall. Sundry other mods - SPOD, onboard air, functional H4 headlights, limb risers and the like - because I like to tinker.

In the future? Atlas II?

I'm looking forward to being active in the community and to meeting a bunch of new friends.

Philip
Attachments
All back togeher again
All back togeher again
User avatar
Marky
BSJ Member
Posts: 1891
Joined: Fri Jan 01, 2010 4:41 pm
Jeep Year: 2013
Jeep Model: JK Wrangler
Real Name: Marky
Location: Fitchburg

Re: Hello from Waltham

Unread post by Marky »

Welcome! Can't wait to see that thing out on the trail!
2014-19 Vice President
Other positions: DOE, At-Large
2013 JK Rubicon, 3" lift, 35" tires, lots of armor
User avatar
del_TJ
BSJ 101 Planning Commitee
Posts: 381
Joined: Thu Aug 26, 2010 1:19 pm
Jeep Year: 1998
Jeep Model: TJ Wrangler
Location: Newton, MA

Re: Hello from Waltham

Unread post by del_TJ »

Welcome aboard. That's a real nice JK build!

I'm just a town over from you in Newton. Hope to see you on the trail this year.

Tony
User avatar
ASauer17
BSJ BOD President
Posts: 3151
Joined: Fri Apr 08, 2011 12:32 pm
Jeep Year: 1998
Jeep Model: TJ Wrangler
Real Name: Amanda
Location: Hubbardston ma

Re: Hello from Waltham

Unread post by ASauer17 »

Finally... someone close to me!!! Welcome!
98/99 TJ
2025 President
----------------------------------------
2023 & 2024 President
2021 Director of Events
2018 Secretary
2016 & 2017 President
2014 & 2015 Secretary
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: Hello from Waltham

Unread post by Frank »

Hey Phil & Michele: Welcome to our great club. Awesome rig. If you would like to get rid of the bungee cord (to stop rattle ) im guessing ? Get some silicone , put grease on your pass through bolt and load up the hole with the silicone. Just the bolt , not the clevis. Let it set up over night and Tada ! No more rattle. The bolt will pull right out thanks to the grease ! This tip is free ! Unless you use the bungee to pull out full size rigs. FjR68
User avatar
Carl McFly
BSJ Member
Posts: 2466
Joined: Wed Dec 23, 2009 11:14 pm
Jeep Year: 2000
Jeep Model: TJ Wrangler
Real Name: Carl
Location: Medford MA

Re: Hello from Waltham

Unread post by Carl McFly »

Welcome aboard! You're going to like it here

You making the August 19 run?
"Roads? Where we're going, we don't need roads"
Post Reply