OX Lockers
-
KevinP
- BSJ 101 Planning Commitee
- Posts: 104
- Joined: Sat Nov 12, 2011 9:22 pm
- Jeep Year: 1995
- Jeep Model: YJ Wrangler
OX Lockers
Anyone know any info on these? Good or bad?
-
johnsxj
- BSJ 101 Planning Commitee
- Posts: 1346
- Joined: Wed Dec 23, 2009 10:58 pm
- Jeep Year: 1988
- Jeep Model: XJ Cherokee
- Location: West Townsend
Re: OX Lockers
Been running an OX in the front of my Jeep for quite a while.
I like that it's selectable, is a simple design, when it's on it's ON (full spool) and comes with a beefy diff cover.
You do need to make sure that thread locking compound is properly used on the carrier hardware, care needs to be take to make sure the control cable is routed out of harms way, and it sometimes takes a few feet for it to engage.
I like that it's selectable, is a simple design, when it's on it's ON (full spool) and comes with a beefy diff cover.
You do need to make sure that thread locking compound is properly used on the carrier hardware, care needs to be take to make sure the control cable is routed out of harms way, and it sometimes takes a few feet for it to engage.
You can't bolt on experience!!!!!!
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
Function over form=4x4
"The opinions expressed in this program do not reflect the views of this network."
-
Marky
- BSJ Member
- Posts: 1891
- Joined: Fri Jan 01, 2010 4:41 pm
- Jeep Year: 2013
- Jeep Model: JK Wrangler
- Real Name: Marky
- Location: Fitchburg
Re: OX Lockers
I've been running OX front and rear and I have no complaints.
2014-19 Vice President
Other positions: DOE, At-Large
2013 JK Rubicon, 3" lift, 35" tires, lots of armor
Other positions: DOE, At-Large
2013 JK Rubicon, 3" lift, 35" tires, lots of armor
-
Hoodoo Man
- BSJ 101 Planning Commitee
- Posts: 3799
- Joined: Fri Jan 01, 2010 11:29 am
- Jeep Year: 1970
- Jeep Model: C101
- Real Name: Jeff Cambray
- Location: Westford MA
Re: OX Lockers
ARB is more or less the industry standard across the globe. OX is very good too though.
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
-
smileyfish
- BSJ 101 Planning Commitee
- Posts: 371
- Joined: Fri Jan 01, 2010 12:07 pm
- Jeep Model: CJ3B
- Location: STILL DREAMMING OF MOAB!!
Re: OX Lockers
Loved the OX in the front of my tj