Hello BSJ
Moderator: Kurt
Forum rules
Please post a pic of your jeep.
Tell us about the mods you have made.
Tell us about the mods you hope to make in the future.
How long have you been a member of Baystate?
How long have you been offroading?
Is this your first jeep?
AND REMEMBER ** NO TRAIL NAMES **
Please post a pic of your jeep.
Tell us about the mods you have made.
Tell us about the mods you hope to make in the future.
How long have you been a member of Baystate?
How long have you been offroading?
Is this your first jeep?
AND REMEMBER ** NO TRAIL NAMES **
- KevinP
- BSJ 101 Planning Commitee
- Posts: 104
- Joined: Sat Nov 12, 2011 9:22 pm
- Jeep Year: 1995
- Jeep Model: YJ Wrangler
Hello BSJ
Hello BSJ,
I'm new to the forums and Jeeps in general. I just bought my first jeep a week ago. It's a stock 95 YJ, and needs some work but I'm hoping she's ready to roll by spring. I'm looking forward to chatting with you guys and gals as my project rolls along. I'll post pics and parts as I go, and I'm open to advice and constructive criticism. I would like to give a special thanks to Frank for all his advice and for helping me get started off in the right direction.
I'm new to the forums and Jeeps in general. I just bought my first jeep a week ago. It's a stock 95 YJ, and needs some work but I'm hoping she's ready to roll by spring. I'm looking forward to chatting with you guys and gals as my project rolls along. I'll post pics and parts as I go, and I'm open to advice and constructive criticism. I would like to give a special thanks to Frank for all his advice and for helping me get started off in the right direction.
Last edited by KevinP on Mon Oct 21, 2013 6:53 pm, edited 1 time in total.
- Kurt
- BSJ Member
- Posts: 4209
- Joined: Wed Dec 23, 2009 11:53 am
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
- Real Name: Kurt K.
- Location: Pepperell, MA
Re: Hello BSJ
Kevin,
Welcome to the forum!
You'll find the people here are a great group of folks
Feel free to post up any build up questions in our Tech section.
We'll be happy to help guide you along on your Jeep journey
Welcome to the forum!
You'll find the people here are a great group of folks
Feel free to post up any build up questions in our Tech section.
We'll be happy to help guide you along on your Jeep journey
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
- KevinP
- BSJ 101 Planning Commitee
- Posts: 104
- Joined: Sat Nov 12, 2011 9:22 pm
- Jeep Year: 1995
- Jeep Model: YJ Wrangler
Re: Hello BSJ
Thanks Kurt
- Frank
- Frankie BSJ Member
- Posts: 4145
- Joined: Sun Dec 27, 2009 8:54 am
- Jeep Year: 1974
- Jeep Model: CJ5
Re: Hello BSJ
Kevin : Your gonna like this group of Jeepers. Mostly cause we drive JEEPS ! Best club in the area. Need anything , just ask. Cant wait to see ya on the trails. FjR68
- KevinP
- BSJ 101 Planning Commitee
- Posts: 104
- Joined: Sat Nov 12, 2011 9:22 pm
- Jeep Year: 1995
- Jeep Model: YJ Wrangler
Re: Hello BSJ
Ok, so far i ordered the Banks monster exhaust, k&n filter, Rubicon Express 4.5 extreme duty suspension, Skyjacker 7000 hydro shocks, slip yoke eliminator kit, tom woods Drive shaft, and Smitty Built SRC front bumper. My next order will be OX lockers front and rear, 1" body lift, and Bushwacker Flat Style Flares For 97-06 Jeep® Wrangler TJ & Unlimited ( If it will fit ). Im currently looking for a ford 8.8, and i will be using 4.10's up front also. I plan on making my own skids. Im going with the Goodyear MT/s in 33x12,5 to start but will consider 35's if possible.
Any suggestions would be appreciated. Thanks
Any suggestions would be appreciated. Thanks
- ZAEDOCK
- BSJ Member
- Posts: 2428
- Joined: Fri Jan 01, 2010 11:18 am
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
Re: Hello BSJ
You'll want more than 4.10's if you go to 35's.
BSJ President 2003 - 2005Carl McFly wrote:X2, I agree with Joe. And not just because he's man candy
- KevinP
- BSJ 101 Planning Commitee
- Posts: 104
- Joined: Sat Nov 12, 2011 9:22 pm
- Jeep Year: 1995
- Jeep Model: YJ Wrangler
Re: Hello BSJ
Well i was thinking on going with the 4.56 gears but wasnt sure if the 35's would fit
- ZAEDOCK
- BSJ Member
- Posts: 2428
- Joined: Fri Jan 01, 2010 11:18 am
- Jeep Year: 1992
- Jeep Model: YJ Wrangler
Re: Hello BSJ
I would go with 4.88's (lowest you can go on your Dana 30).
BSJ President 2003 - 2005Carl McFly wrote:X2, I agree with Joe. And not just because he's man candy
- KevinP
- BSJ 101 Planning Commitee
- Posts: 104
- Joined: Sat Nov 12, 2011 9:22 pm
- Jeep Year: 1995
- Jeep Model: YJ Wrangler
Re: Hello BSJ
ok, im not afraid of gear just a newb thats all...lol
- Frank
- Frankie BSJ Member
- Posts: 4145
- Joined: Sun Dec 27, 2009 8:54 am
- Jeep Year: 1974
- Jeep Model: CJ5
Re: Hello BSJ
Kevin : Your Jeep is a 95 YJ if I remember, Yes ? Some one in the club will know if 35s will fit with a4.5 in lift. Even if there is some trimming to be done. Then you wont have to do things twice. Decide how hard you want to run it first. Being new and alot to learn is overwhelming ! Everyone starts somewhere so dont worry about asking questions. I started on 32s and went with 35s a 4x1 gear set in the T-case, and 4.56s but it was 4 or 5 yrs. in the making . I wish I had gone with the 88s. What I have is good enough most of the time , but there are those times when you just wish . Let things fall into place while you learn and develop a driving habit . Build as you go, eliminate the wishes . Good luck FjR68
- KevinP
- BSJ 101 Planning Commitee
- Posts: 104
- Joined: Sat Nov 12, 2011 9:22 pm
- Jeep Year: 1995
- Jeep Model: YJ Wrangler
Re: Hello BSJ
Thanks Frank. Hopefully I'll learn as I go and not break as I go. Well I guess breaking is learning too...lol
- Hoodoo Man
- BSJ 101 Planning Commitee
- Posts: 3799
- Joined: Fri Jan 01, 2010 11:29 am
- Jeep Year: 1970
- Jeep Model: C101
- Real Name: Jeff Cambray
- Location: Westford MA
Re: Hello BSJ
KevinP wrote:Thanks Frank. Hopefully I'll learn as I go and not break as I go. Well I guess breaking is learning too...lol
welcome to the forum square eye jeep!
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
-
- BSJ Member
- Posts: 326
- Joined: Sat Jan 02, 2010 12:09 pm
- Jeep Year: 1994
- Jeep Model: YJ Wrangler
- Location: Hingham Ma
Re: Hello BSJ
I run 4.56 gears with 33/12.50s and I'm happy with the gearing. I also have the 4 to 1 Terra low conversion and its almost too slow on the trail. I had my Ford 8.8 built by a local transmission shop guy i know in hingham. Was very reasonable. Pauls transmission. Welcome to the club.
- KevinP
- BSJ 101 Planning Commitee
- Posts: 104
- Joined: Sat Nov 12, 2011 9:22 pm
- Jeep Year: 1995
- Jeep Model: YJ Wrangler
Re: Hello BSJ
I plan on doing the 4 to 1 next year. I seem to be running out of cash right now .
-
- BSJ Member
- Posts: 326
- Joined: Sat Jan 02, 2010 12:09 pm
- Jeep Year: 1994
- Jeep Model: YJ Wrangler
- Location: Hingham Ma
Re: Hello BSJ
Common issue. I know the feeling.