Mounting a pump on the ABS platform

[Hoodoo Man]

So i need to mount up an ARB pump on the ABS tray under the master cylinder. I was looking at it last night and was wondering if I need to pull the tray out to be able to through bolt the pump to the platform. I cant see how I can attach more than 2 bolts to the side as I cant reach under the tray except near the edge. when I tried to remove the 4 or so bolts that hold the base of the platform to the Jeep they seem to just spin. Im guessing I can get vice grips on the outter two bolts but what about the ones on the firewall side? Any thoughts or advice on this?

[ChrisD]

Yes, you will need to pull the tray to mount the compressor. I can provide photos and exact dimensions so that you can clear the brake crap that is in the way.

[ChrisD]

http://www.jeepforum.com/forum/f9/where ... r-1227719/

[Hoodoo Man]

http://www.jeepforum.com/forum/f9/where ... r-1227719/

LOL I posted in that thread this monring...

the bolts seem to just spin in place when I loosen them.... Jeeps are fun...

[nostaw]

http://www.jeepforum.com/forum/f9/where ... r-1227719/

LOL I posted in that thread this monring...

the bolts seem to just spin in place when I loosen them.... Jeeps are fun...

Focus your mental energies and burn them out!

I've got a crystal I can sell you to help.... Just 4 easy payments of $19.95 + S&H....



JW

[DOUG]

I removed the tray and mounted the compressors to it on Kellys Rubi. I don't remember having a hard time with it, it was only 2 years old at the time though.
Not much help, I know.

[Hoodoo Man]

Had to cut one bolt out with a dremmel but got it out.

[DOUG]

Pics?

[Frank]

Whats an ABS platform ? FjR68