weird startup issue

User avatar
Baseshakers
BSJ 101 Planning Commitee
Posts: 929
Joined: Mon Jan 04, 2010 3:19 pm
Jeep Year: 2005
Jeep Model: LJ Wrangler

weird startup issue

Unread post by Baseshakers »

so when i first start my jeep more than half the time it records zero oil pressure, and doesn't go up at all. eventually the check gauges flashes and beeps at me. instead, if i start the jeep, turn it off immediately, then start it right back up it works normally. today i got a "low oil pressure" code (P0522). oil pressure looked fine while i was driving, in the normal range. any thoughts on why this is happening?
"god had his sh!t together when he made boobies" -franky
johnsxj
BSJ 101 Planning Commitee
Posts: 1346
Joined: Wed Dec 23, 2009 10:58 pm
Jeep Year: 1988
Jeep Model: XJ Cherokee
Location: West Townsend

Re: weird startup issue

Unread post by johnsxj »

I would say you have a loose wire to the oil pressure sending unit, or a bad sending unit.
You can't bolt on experience!!!!!!
Function over form=4x4

"The opinions expressed in this program do not reflect the views of this network."
User avatar
Kurt
BSJ Member
Posts: 4205
Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA

Re: weird startup issue

Unread post by Kurt »

johnsxj wrote:I would say you have a loose wire to the oil pressure sending unit, or a bad sending unit.
X2
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
User avatar
Baseshakers
BSJ 101 Planning Commitee
Posts: 929
Joined: Mon Jan 04, 2010 3:19 pm
Jeep Year: 2005
Jeep Model: LJ Wrangler

Re: weird startup issue

Unread post by Baseshakers »

thanks guys, i'll take a look at the wiring tonight. i'm assuming this is what i might need? http://www.quadratec.com/products/2242.htm
"god had his sh!t together when he made boobies" -franky
User avatar
Kurt
BSJ Member
Posts: 4205
Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA

Re: weird startup issue

Unread post by Kurt »

Should be like this... Image

$9.77 from Rockauto.com
$19.99 at Advanced Auto
$22.99 from Autozone
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
User avatar
Baseshakers
BSJ 101 Planning Commitee
Posts: 929
Joined: Mon Jan 04, 2010 3:19 pm
Jeep Year: 2005
Jeep Model: LJ Wrangler

Re: weird startup issue

Unread post by Baseshakers »

gotcha. i don't think i'd trust an autozone unit, but maybe napa carries it. though advanced isn't bad.
"god had his sh!t together when he made boobies" -franky
User avatar
Kurt
BSJ Member
Posts: 4205
Joined: Wed Dec 23, 2009 11:53 am
Jeep Year: 1992
Jeep Model: YJ Wrangler
Real Name: Kurt K.
Location: Pepperell, MA

Re: weird startup issue

Unread post by Kurt »

Or you can try a dealer. The dealer part number is: 04868672AA
"Build It, Run It, Break It, Improve It, Repeat!"
NEA Treasurer 2016, 2017, 2018, 2019, 2020
BSJ Treasurer 2020
User avatar
Coolens98TJ
BSJ 101 Planning Commitee
Posts: 15
Joined: Wed Sep 01, 2010 10:45 pm
Jeep Year: 1998
Jeep Model: TJ Wrangler
Location: Derry, New Hampshire

Re: weird startup issue

Unread post by Coolens98TJ »

For the price the stealership wants I bet you could buy a few discount auto ones....
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: weird startup issue

Unread post by Frank »

Thats so weird , My Sportrac does it only in the winter or when its like 40 or colder. The first time I freaked. No engine noises and I put a mechanical gauge to make sure. Still does it now even with a new sensor. ? Whats next? FjR68
nostaw

Re: weird startup issue

Unread post by nostaw »

When I replaced mine I got one from Crown Automotive (via Lou)... Wasn't too expensive. Doesn't read quite the same as the stock one, but it works...

JW
User avatar
ZAEDOCK
BSJ Member
Posts: 2427
Joined: Fri Jan 01, 2010 11:18 am
Jeep Year: 1992
Jeep Model: YJ Wrangler

Re: weird startup issue

Unread post by ZAEDOCK »

"T" in a mechanical gauge. I never trust the factory sending units. Just make sure you get a good one that uses copper line.
Carl McFly wrote:X2, I agree with Joe. And not just because he's man candy
BSJ President 2003 - 2005
User avatar
wesley4x4
BSJ 101 Planning Commitee
Posts: 628
Joined: Mon Jan 04, 2010 4:06 pm
Jeep Year: 1999
Jeep Model: TJ Wrangler
Location: Derry, NH

Re: weird startup issue

Unread post by wesley4x4 »

my jeep will do that if i have it on acc for a minute then start the jeep but about a mile down the road it fixes itself
“I am so clever that sometimes I don't understand a single word of what I am saying.”
"The difference between genius and stupidity is that genius has its limits" Albert Einstein
Haters, they don't have 4 bangers, and aren't JDM like me!
User avatar
Baseshakers
BSJ 101 Planning Commitee
Posts: 929
Joined: Mon Jan 04, 2010 3:19 pm
Jeep Year: 2005
Jeep Model: LJ Wrangler

Re: weird startup issue

Unread post by Baseshakers »

$15 at the dealer and 10 minutes of wrenching later the issue is gone. FYI, for some reason they needed the VIN # so it may be very specific. not that the guys at most dealerships are all that good, but i'm glad i went there versus autozone. i never would have gotten the right part.
"god had his sh!t together when he made boobies" -franky
Post Reply