How do I keep my trailer connector from getting smashed?
-
MattJ
- BSJ 101 Planning Commitee
- Posts: 404
- Joined: Wed Mar 22, 2017 4:29 pm
- Jeep Year: 2016
- Jeep Model: JK Wrangler
- Real Name: Matt
How do I keep my trailer connector from getting smashed?
Should I have a some protective armor welded around it? Or should I cut a hole in my bumper and move it up inside? Any advice would be appreciated!
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
-
BlackNBlue-ISH
- BSJ Member
- Posts: 1818
- Joined: Mon Mar 24, 2014 12:25 pm
- Jeep Year: 2005
- Jeep Model: TJ Wrangler
- Real Name: Daniel or "ish"
- Location: Manchester, NH
Re: How do I keep my trailer connector from getting smashed?
Make it a pigtail that you can disconnect when not in use. If you are towing while wheeling, route it above the bumper.
2005 TJ, built and beat accordingly
-
JeepAddict
- BSJ Member
- Posts: 523
- Joined: Thu Mar 02, 2017 8:37 pm
- Jeep Year: 2016
- Jeep Model: JK Wrangler
- Real Name: Gary L.
Re: How do I keep my trailer connector from getting smashed?
Thats what I did. I have pig tail that it up out of the way...
Chrome? Never heard of it.
-
MattJ
- BSJ 101 Planning Commitee
- Posts: 404
- Joined: Wed Mar 22, 2017 4:29 pm
- Jeep Year: 2016
- Jeep Model: JK Wrangler
- Real Name: Matt
Re: How do I keep my trailer connector from getting smashed?
Thanks!
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
-
MattJ
- BSJ 101 Planning Commitee
- Posts: 404
- Joined: Wed Mar 22, 2017 4:29 pm
- Jeep Year: 2016
- Jeep Model: JK Wrangler
- Real Name: Matt
Re: How do I keep my trailer connector from getting smashed?
I figured it out. The bracket is installed per Mopar instructions, with just two hex screws. And the connector itself has a 7-pin pigtail that is easy to disconnect.
(the other valve is my bumper water tank spigot)
(the other valve is my bumper water tank spigot)
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
-
Frank
- Frankie BSJ Member
- Posts: 4145
- Joined: Sun Dec 27, 2009 8:54 am
- Jeep Year: 1974
- Jeep Model: CJ5
Re: How do I keep my trailer connector from getting smashed?
I hope you have a weather cover for the pig tail. Also get a small tube of dielectric grease to push into every connection FjR68
-
MattJ
- BSJ 101 Planning Commitee
- Posts: 404
- Joined: Wed Mar 22, 2017 4:29 pm
- Jeep Year: 2016
- Jeep Model: JK Wrangler
- Real Name: Matt
Re: How do I keep my trailer connector from getting smashed?
Good advice. Thanks!
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle