Jeep "friendly" inspection garages

You can talk about anything here
JoeyA-261
BSJ Member
Posts: 15
Joined: Tue Feb 26, 2019 8:10 pm
Jeep Year: 2017
Jeep Model: JK Wrangler
Real Name: Joey

Jeep "friendly" inspection garages

Unread post by JoeyA-261 »

Het everyone,

Got some flat fenders since the last inspection and the local jeep dealer - after "promising" to get it done, did not... only a 2 1/2" lift but the front fenders leave about 2-3 inches of the tire exposed. Rear tires seem to be ok.

Where do you all go that might not be so 'to the letter of the rule'?

I'm down in Franklin, but i'll go where i need to for the sticker.

Whatcha got?

Joey
User avatar
MDSRACING398
BSJ 101 Planning Commitee
Posts: 3294
Joined: Fri Feb 12, 2016 10:24 pm
Jeep Year: 1985
Jeep Model: CJ7
Real Name: Mark

Re: Jeep "friendly" inspection garages

Unread post by MDSRACING398 »

Not a question that is answered here.
Do it right the first time!
Second place is First Loser! Work Harder
Semper Fi
User avatar
Frank
Frankie BSJ Member
Posts: 4145
Joined: Sun Dec 27, 2009 8:54 am
Jeep Year: 1974
Jeep Model: CJ5

Re: Jeep "friendly" inspection garages

Unread post by Frank »

Move to CT. ONly drawback is the Gov taxes everthing , now even laundry matts FjR68
User avatar
BlackNBlue-ISH
BSJ Member
Posts: 1818
Joined: Mon Mar 24, 2014 12:25 pm
Jeep Year: 2005
Jeep Model: TJ Wrangler
Real Name: Daniel or "ish"
Location: Manchester, NH

Re: Jeep "friendly" inspection garages

Unread post by BlackNBlue-ISH »

2-3 inches of exposed tire is a lot. Way outside the law, considering the law is none.

Build your rig in compliance, or buy a truck/trailer. Mine passes inspection legally at any inspection station in NH.
2005 TJ, built and beat accordingly
User avatar
Hoodoo Man
BSJ 101 Planning Commitee
Posts: 3799
Joined: Fri Jan 01, 2010 11:29 am
Jeep Year: 1970
Jeep Model: C101
Real Name: Jeff Cambray
Location: Westford MA

Re: Jeep "friendly" inspection garages

Unread post by Hoodoo Man »

JoeyA-261 wrote:Het everyone,

Got some flat fenders since the last inspection and the local jeep dealer - after "promising" to get it done, did not... only a 2 1/2" lift but the front fenders leave about 2-3 inches of the tire exposed. Rear tires seem to be ok.

Where do you all go that might not be so 'to the letter of the rule'?

I'm down in Franklin, but i'll go where i need to for the sticker.

Whatcha got?

Joey
this is a public and searchable message board. If someone has it in for someone and that garage gets named here the shop can get in trouble. you are better off being in compliance and getting inspection tires on the Jeep for inspection. Not that anyone here has ever done that.

I have a JKU with a 2.5" lift and a set of wide 33s last time I got inspected. Stock flares and small overhang of tire outside of flares. No issues with inspection and did not go anywhere special. Stock JK/JL take off tires can be gotten for about 400 for 4. Dont leave the full size 35" spare on and if you go for inspection that way you should have no issues. I have yet to hear horror stories in MA that I expected with new cameras etc. I'm sure they occur but in social media and boards I visit...
1970 Jeepster- stock
2003 Jeep Rubicon 2" BDS Spring lift 35s and MCE fenders
2012 Jeep JKU 2.5' Terafkex spring lift, Rock Hard Bumpa, skids, BodyArmor4x4 sliders..
JoeyA-261
BSJ Member
Posts: 15
Joined: Tue Feb 26, 2019 8:10 pm
Jeep Year: 2017
Jeep Model: JK Wrangler
Real Name: Joey

Re: Jeep "friendly" inspection garages

Unread post by JoeyA-261 »

Thanks guys, I totally appreciate the point. I wasn't too clear in my initial post - I'm wasn't looking for a shop to break the law, just one reads the law as it's written. I just went down the road to where I take my wife a daughters car and got no trouble.

See you out there,

Joey
Post Reply