06 TJ
-
BlackNBlue-ISH
- BSJ Member
- Posts: 1821
- Joined: Mon Mar 24, 2014 12:25 pm
- Jeep Year: 2005
- Jeep Model: TJ Wrangler
- Real Name: Daniel or "ish"
- Location: Manchester, NH
Re: 06 TJ
I've now got death wobble. It hits around 45-50 mph, but if i accelerate smooth and slow through that speed, its fine 65-75 even over expansion joints. I'll be dropping it off for a full 4x4 alignment and tire balance at an offroad shop this week.
2005 TJ, built and beat accordingly
-
MDSRACING398
- BSJ 101 Planning Commitee
- Posts: 3294
- Joined: Fri Feb 12, 2016 10:24 pm
- Jeep Year: 1985
- Jeep Model: CJ7
- Real Name: Mark
Re: 06 TJ
I believe last year for factory cam bolts was 99. There are companies that make aftermarket kits.
Do it right the first time!
Second place is First Loser! Work Harder
Semper Fi
Second place is First Loser! Work Harder
Semper Fi
-
BlackNBlue-ISH
- BSJ Member
- Posts: 1821
- Joined: Mon Mar 24, 2014 12:25 pm
- Jeep Year: 2005
- Jeep Model: TJ Wrangler
- Real Name: Daniel or "ish"
- Location: Manchester, NH
Re: 06 TJ
I don’t see why not. The brackets are the same, with the same slotted hole and, just no factory cam washer/bolts on the newer stuff. You should be able to use the cam bolts
2005 TJ, built and beat accordingly
-
MDSRACING398
- BSJ 101 Planning Commitee
- Posts: 3294
- Joined: Fri Feb 12, 2016 10:24 pm
- Jeep Year: 1985
- Jeep Model: CJ7
- Real Name: Mark
Re: 06 TJ
The 04 call them cam bolts but there not. Why I said either go back to 99 or get aftermarket kit. Which is cheaper
Do it right the first time!
Second place is First Loser! Work Harder
Semper Fi
Second place is First Loser! Work Harder
Semper Fi
-
Frank
- Frankie BSJ Member
- Posts: 4145
- Joined: Sun Dec 27, 2009 8:54 am
- Jeep Year: 1974
- Jeep Model: CJ5
Re: 06 TJ
Okay , so hes been driving it and said its great . Now its starting to do it again. Should I just suggest adjustable lowers or try to see if the cams I have from the 04 work. Middle of the road brand ? Who make good ones ? FjR68