AEV Bumper Water Tank: Gravity Spigot

User avatar
MattJ
BSJ 101 Planning Commitee
Posts: 404
Joined: Wed Mar 22, 2017 4:29 pm
Jeep Year: 2016
Jeep Model: JK Wrangler
Real Name: Matt

AEV Bumper Water Tank: Gravity Spigot

Unread post by MattJ »

I've always wanted to use the water tanks in my AEV rear bumper, but couldn't stand the thought of hassling with the hand-pump dispenser that is required to squirt the water out of the tanks. So I spliced a spigot onto the connector hose at the lowest point. The spigot tucks up inside the bumper with a velcro strap when not in use. I've tested it a few times. No leaks. Capacity of the tanks is around 4 gallons.

Image

Image

Image
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
User avatar
del_TJ
BSJ 101 Planning Commitee
Posts: 381
Joined: Thu Aug 26, 2010 1:19 pm
Jeep Year: 1998
Jeep Model: TJ Wrangler
Location: Newton, MA

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by del_TJ »

Your jeep pees now? :lol:
User avatar
MattJ
BSJ 101 Planning Commitee
Posts: 404
Joined: Wed Mar 22, 2017 4:29 pm
Jeep Year: 2016
Jeep Model: JK Wrangler
Real Name: Matt

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by MattJ »

Yes! I'll have to fill the tanks with lemonade one of these days just to take some good photos . . .
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
User avatar
MattJ
BSJ 101 Planning Commitee
Posts: 404
Joined: Wed Mar 22, 2017 4:29 pm
Jeep Year: 2016
Jeep Model: JK Wrangler
Real Name: Matt

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by MattJ »

Actually, I just came up with a BETTER idea! Maybe my next project should be to build a monshine still.

Image
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
User avatar
BlackNBlue-ISH
BSJ Member
Posts: 1818
Joined: Mon Mar 24, 2014 12:25 pm
Jeep Year: 2005
Jeep Model: TJ Wrangler
Real Name: Daniel or "ish"
Location: Manchester, NH

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by BlackNBlue-ISH »

MattJ wrote:Actually, I just came up with a BETTER idea! Maybe my next project should be to build a monshine still.
for after the driving is done for the day, obviously...

are there two or more separate tanks, or are they one large tank? I'm thinkin whiskey in one, and rum in another...
2005 TJ, built and beat accordingly
User avatar
MattJ
BSJ 101 Planning Commitee
Posts: 404
Joined: Wed Mar 22, 2017 4:29 pm
Jeep Year: 2016
Jeep Model: JK Wrangler
Real Name: Matt

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by MattJ »

BlackNBlue-ISH wrote:
MattJ wrote:Actually, I just came up with a BETTER idea! Maybe my next project should be to build a monshine still.
for after the driving is done for the day, obviously...

are there two or more separate tanks, or are they one large tank? I'm thinkin whiskey in one, and rum in another...
The ideas just keep getting better and better on this one . . .

I didn't mention it in my post, but there ARE two separate tanks with my configuration. Due to the t-junction I installed, the fluid pressure isn't strong enough to allow me to fill both tanks from one side. So I had to drill a cap into the other side tank and fill it separately. The spigot drains from the right side first, since it has a built in air vent. Then I loosen the cap on the left side and it drains out the spigot next.

Perfect for a cocktail combination as you suggest!

Image
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
User avatar
pirahnah3
BSJ Member
Posts: 1317
Joined: Mon Jun 27, 2016 9:26 pm
Jeep Year: 1997
Jeep Model: TJ Wrangler
Real Name: Jim

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by pirahnah3 »

Im with Dan on the uses for the two tanks hehehe

Looks great, I always thought it was a great use of the space especially as a more expedition type vehicle where you need to be able to take a bunch of things with you.

As for the vent, what about adding a pressure relief valve to the fill cap you added to allow it to auto drain when needed.
'97 thats been chopped up and put back together, and ready to take on the trails.
User avatar
MattJ
BSJ 101 Planning Commitee
Posts: 404
Joined: Wed Mar 22, 2017 4:29 pm
Jeep Year: 2016
Jeep Model: JK Wrangler
Real Name: Matt

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by MattJ »

pirahnah3 wrote:Im with Dan on the uses for the two tanks hehehe

Looks great, I always thought it was a great use of the space especially as a more expedition type vehicle where you need to be able to take a bunch of things with you.

As for the vent, what about adding a pressure relief valve to the fill cap you added to allow it to auto drain when needed.
Another good idea . . .
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
User avatar
BlackNBlue-ISH
BSJ Member
Posts: 1818
Joined: Mon Mar 24, 2014 12:25 pm
Jeep Year: 2005
Jeep Model: TJ Wrangler
Real Name: Daniel or "ish"
Location: Manchester, NH

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by BlackNBlue-ISH »

Though with a pressure relief valve, you could be susceptible to accidental drain if for some reason the drain valve gets broken while wheeling. The back pressure as it’s currently designed could prevent the tanks from draining out quicker.
2005 TJ, built and beat accordingly
User avatar
BlackNBlue-ISH
BSJ Member
Posts: 1818
Joined: Mon Mar 24, 2014 12:25 pm
Jeep Year: 2005
Jeep Model: TJ Wrangler
Real Name: Daniel or "ish"
Location: Manchester, NH

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by BlackNBlue-ISH »

With the right fittings, you could pressurize the tank with an onboard air system, and a sprayer attachment to the drain hose for sink/shower duty.
2005 TJ, built and beat accordingly
User avatar
RalphTomaccio
BSJ 101 Planning Commitee
Posts: 1251
Joined: Sun Sep 29, 2013 9:50 am
Jeep Year: 2012
Jeep Model: JK Wrangler
Location: Slatersville RI

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by RalphTomaccio »

User avatar
MattJ
BSJ 101 Planning Commitee
Posts: 404
Joined: Wed Mar 22, 2017 4:29 pm
Jeep Year: 2016
Jeep Model: JK Wrangler
Real Name: Matt

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by MattJ »

A pressurized system was actually my initial plan. I even traded several messages with someone who posted a YouTube video of how to do it with an onboard compressor and the AEV tanks. It was a great design that allowed him to connect a hose and spray down his Jeep on the trail after mud runs. My plan was to use a portable compressor and install a spare tire valve on the AEV bumper tanks, but I ultimately decided a gravity spigot would be almost as good. One person mentioned that a portable compressor might pump contaminants into my water tanks, and that was the advice that convinced me to give up on a pressurized system.

Here's a link where I solicited some engineering advice a few weeks ago:

http://forum.expeditionportal.com/threa ... me-advice!

And here's the YouTube video that got me started on this concept:

https://www.youtube.com/watch?v=VSqvijxMC5Y
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
User avatar
MattJ
BSJ 101 Planning Commitee
Posts: 404
Joined: Wed Mar 22, 2017 4:29 pm
Jeep Year: 2016
Jeep Model: JK Wrangler
Real Name: Matt

Re: AEV Bumper Water Tank: Gravity Spigot

Unread post by MattJ »

Well, I learned that a 1/2" CTS (copper tube sizing) is 5/8" outside diameter, which is exactly what I was looking for! Here are the photos of the upgraded t-junction. I still have to fill both side tanks separately, but this upgrade looks a lot cleaner and actually wedges inside the bumper very snug.

Image

Image
___=_=_=
l l ,[_____],
l---- L -[]lllllll[]-
()_) ()_)--o-)_) BEV: the BSA Expedition Vehicle
Post Reply