Kurt wrote:I should be available. Garage too if wanted.

Awesome thank you

So still trying to get things buttoned up on the JK. Will anyone be free on Sunday May 29th? It is the Sunday of Memorial Day weekend and pretty much my only free day for the next 5 weeks. :\ Thinking mostly going to try to wrap up electrical stuff. Edit: Also need to look at some break stuff. May h...

I think there should be 31.

Post corrected.

Ready for the next wrenchfest. This one will be mostly all electrical type stuff. Install dual battery box Install Painless accessory control pack Wire up winch Install CB system (if time) The rear lights and rocker lights will most likely still need to be tied into the system later but if we are ab...

WooHoo I got it right!!

Forgive me for sounding uneducated, never dealt with lockers before, but when adding a locker does that not replace the carrier? A locker does replace the carrier but someone mentioned it so I thought I would confirm. Sorry for any confusion. Now I am thinking 4.88...... E lockers and 30 spline fro...

delete

Go 4.88. We just got 37s on our 2015 and it does just fine on the street, pretty easy to go too fast actually. And when coming off the line I have to be careful to not give it too much gas.

You can also use the same carrier when going to 4.88s, anything after that does need a new carrier.

They used a generic one in the video so I did too. Home Depot had an automotive / marine one in the paint department.

Torque wrench is only needed in case Kurt sneezes and cranks it down to 300lb+

Don't forget also to pick up some sealant and lock tite.

I had a blast, it was awesome working with all of you guys.

Want to give a huge thank you to Kurt, Carl, Dan, and Mike (shop owner). We got a bunch done considering it took about an hour and a half to get the Jeep off the ground. When you have a 2dr with LA there are not many places you can put the arms of the lift. After a bunch of trial an error we took th...

Welcome.

I have never wheeled a stock Jeep and if you see me behind the wheel it shows big time. It is much better to start stock and have the Jeep grow as you learn.

SevenXL wrote:Should be a good day for you guys. Looking forward to some pics.

You are welcome to come and hang out.

Modeler wrote:Should have said something when you were over the house the other day, I have 3/8 and 1/2 drive torque wrenches you could have borrowed. Sorry I won't be there Saturday.

Me focus on two things at once? Have you not seen me the last several months?