Well the noise i heard in the jeep was the front R+P Its a new Alloy usa put in during june warranty issue i really think its time for a D 60 Im getting tired of replacing parts on the D30HP even if they have been warranty parts 1st was the alloy axles now the R+P Oh well I am down for a couple of w...

Nice pics

Try this link you can get them made any wat you want
http://www.4bumperstickers.com/safety-b ... ickers.php

Tighten till you break them then back off a 1/4 turn All I do is with a tighten them with a 1/4in ratchit as tight as I can get them with a 3/8 not that tight more leverage with the handle The only thing I torque on the jeep is lug nuts + the skid plate at the same torque

All the tires I had the MTRS are the best allaround tire for road + rocks + mud
For off road Nothing comes close to Swampers IROKs bias ply 36x13.5x17
For a 36in tire they are 1 1/2 inchs taller than my 35in MTR mounted on the jeep both with 25 psi in them

I never thought of using bungie cords LOL

I have Gen Right sliders http://www.genright.com/ProductInfo.asp ... id=RCG2003
I have deep scratches in mine No dents or bends I use them to piviot on rocks with LOL I dropped a foot and landed on the drivers side No damage I really like mine

Carl 1/16 I set mine at a little more like 1 /8 but thats how it tracks straight At 1/16 it pulls to the passenger side with everything on my steering a little tweaked Im very happy it goes straight with no wobble after i set the toe I dont worry that much about the boots They get replace yearly any...

Thanks guys! it was fun. The Heep is already back together. I didnt think My rear tire was that far in the air Great pic That was on the way down. It was higher before we fixed your position. There was a poop load of weight on your front 30 shaft. Poor thing :lol: Funny it did not seem that high HM...

I didnt think My rear tire was that far in the air Great pic

a ziptie would work great thanks Kurt I never have a issue with then being stolen out here Maybe in a city Here in the country almost ever PU truck has them on I use Very lightwire on mine from the hole in the pin tothe bumper in front In the rear I go from the pin aroundthe 2in receiver tube so the...

hope it all went smooth

I had that same issue with my rear shock brackets ( My brackets are even with my rear axle they dont hang down ) I had a 3 /16 plate welded to the axle around tothe bottom of the shock mount It covers the whole shock mount So it welded on 3 sides Its lasted 2 years of being hit hard neve bent at all...

I was wheeling friday + saturday just saw this happy B day Kelly

Thanks every 1 i dont like bdays reminds me i am getting older LOL Thanks